Betekenis van:
add together

Voorbeeldzinnen

1. "That's right. At the least I wish they'd add one to the first floor as well ... Wait a mo! Why are you here!?" "'Why' is obvious isn't it? It's so we can go to the toilet together."
2. Phase shifts are especially significant when measured variables are multiplied together to form new variables, because while amplitudes multiply, phase shifts and associated time delays add.
3. Add the extraneous matter thus extracted to the matter which has passed through the sieve with slotted perforations of 1,0 mm and weigh them together.
4. In addition, PLN 53 million was allocated to bringing forward investments originally planned for after 2006 (this 219 + 53 million add up, together with 10 % financing costs (i.e. 27 million), to 299 million).
5. Since OM Table 2 sets a sleep mode marking-engine limit of 1,4 W, to determine qualification under ENERGY STAR, the manufacturer would add together the sleep mode marking-engine limit and the applicable functional-adder allowances to determine the maximum power consumption permitted for qualification of the base product: 1,4 W + 0,6 W.
6. As emphasised by the Member States concerned in their observations on the decision to open the procedure, the Commission recognises that it is not relevant to add together the amounts of aid corresponding to recapitalisation with guarantees of liabilities as the two types of measures do not have the same effects of distortion of competition.
7. that establishment, together with any establishments handling raw material of animal origin used in the manufacture of the products of animal origin concerned, complies with relevant Community requirements, in particular those of Regulation (EC) No 853/2004, or with requirements that were determined to be equivalent to such requirements when deciding to add that third country to the relevant list in accordance with Article 11;
8. Assuming the USB connection is the primary interface used during the test, the printer model would receive a functional-adder allowance of 0,5 W for USB and 0,1 for the memory card reader, for a total of 0,6 W in functional-adder allowances. Since OM Table 2 sets a sleep mode marking-engine limit of 1,4 W, to determine qualification under ENERGY STAR, the manufacturer would add together the sleep mode marking-engine limit and the applicable functional-adder allowances to determine the maximum power consumption permitted for qualification of the base product: 1,4 W + 0,6 W.
9. The Italian authorities also affirm that, if the delivery limit is not extended (execution stood at 25,65 % at 16 December 2003) with the result that aid is not granted, the ship cannot be completed without enormous economic damage to the yard, together with job losses at both the yard and the undertakings working for it. The Italian authorities add that the shipowner Marnavi and the shipyard have agreed to cancel the contract for the construction of another ship, C.173, whose construction had been disrupted by the events referred to above, and to transfer the supplies available for that ship to ship C.180.
10. The total value for the base product plus the functional adders should be used to determine eligibility. Manufacturers may apply no more than three primary functional adders to each product model, but may apply as many secondary adders as are present (with primary adders in excess of three included as secondary adders). An example of this approach is provided below: Example: Consider a standard-size IJ printer with a USB 2.0 connection and a memory card connection. Assuming the USB connection is the primary interface used during the test, the printer model would receive a functional-adder allowance of 0,5 W for USB and 0,1 for the memory card reader, for a total of 0,6 W in functional-adder allowances. Since OM Table 2 sets a sleep mode marking-engine limit of 1,4 W, to determine qualification under ENERGY STAR, the manufacturer would add together the sleep mode marking-engine limit and the applicable functional-adder allowances to determine the maximum power consumption permitted for qualification of the base product: 1,4 W + 0,6 W. If the power consumption of the printer in sleep mode is measured at or below 2,0 W, then the printer would meet the ENERGY STAR sleep limit.