Betekenis van:
all-metal

Voorbeeldzinnen

1. Accuracy and finish will become more important than high rates of metal removal for 95 percent of all machining operations.
2. .5.1 All metal sheaths and armour of cables shall be electrically continuous and shall be earthed.
3. Metal alloy powder or particulate material, having all of the following characteristics:
4. Coated products. This code includes packaging steels (tinplate, tinned sheet and strip, ECCS), all hot-dipped or electrolytically metal-coated sheet, plate and coils, flat or corrugated, and all sheet, plate and coils, flat or corrugated, coated with organic coatings
5. This code includes packaging steels (tinplate, tinned sheet and strip, ECCS), all hot-dipped or electrolytically metal-coated sheet, plate and coils, flat or corrugated, and all sheet, plate and coils, flat or corrugated, coated with organic coatings
6. Electrical resistance between all metal parts of the rolling stock and the rail shall be low enough to ensure that rising short circuit current will cause disconnection of circuit line breaker (e. g. when the catenary falls on a wagon).
7. melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals.
8. Manufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product
9. Despite these relatively high market shares, the Commission has come to the conclusion that no dominant position is to be expected in the market for railway air springs for two main reasons: Firstly, all competitors (including the parties) have to buy up to 70 % of the parts of the air spring system from their competitors who are either manufactures of the rubber bellow or the metal parts.
10. Converter steels in the case of converter steels (e.g. LD, OBM, etc.) all iron- and steelmaking plant must be considered together, i.e. the MPP of the steelworks can be limited by the availability of hot metal; in such cases the MPP of the steelworks must be calculated on the basis of the iron available allowing for the normal distribution of the iron between the steelworks, foundries, granulating plant and sales as appropriate and the normal scrap charge required for 1 tonne of the finished product. —
11. Converter steels in the case of converter steels (e.g. LD, OBM, etc.) all iron- and steelmaking plant must be considered together, i.e. the MPP of the steelworks can be limited by the availability of hot metal; in such cases the MPP of the steelworks must be calculated on the basis of the iron available allowing for the normal distribution of the iron between the steelworks, foundries, granulating plant and sales as appropriate and the normal scrap charge required for 1 tonne of the finished product.
12. According to Article 2 of the guidelines, ‘an individual ad hoc payment made to a single firm, or aid confined to one area of activity, may have a major impact on competition in the relevant market, and its effects on regional development are likely to be too limited … Consequently, the derogations in question [from the general prohibition of aid] will normally be granted only for multisectoral aid schemes open, in a given region, to all firms in the sectors concerned’. An electricity tariff which is granted selectively to a few individual undertakings in the metal sector is manifestly not in line with the spirit of regional aid, which is meant to be multisectoral.