Betekenis van:
become flat

to become flat
Werkwoord
  • versterven
  • lose sparkle or bouquet

Synoniemen

Hyperoniemen

Werkwoord

become flat

Voorbeeldzinnen

  1. If these components project by more than 9,5 mm from the surface of the instrument panel, they shall be so designed and constructed as to be able, under the effect of a longitudinal horizontal force of 37.8 daN delivered by a flat-ended ram of not more than 50 mm diameter, either to retract into the surface of the panel until they do not project by more than 9,5 mm or to become detached; in the latter case, no dangerous projections of more than 9,5 mm shall remain; a cross-section not more than 6,5 mm from the point of maximum projection shall be not less than 6,5 cm2 in area.
  2. If these components project by more than 9,5 mm from the surface of the instrument panel, they shall be so designed and constructed as to be able, under the effect of a longitudinal horizontal force of 37.8 daN delivered by a flat-ended ram of not more than 50 mm diameter, either to retract into the surface of the panel until they do not project by more than 9,5 mm or to become detached; in the latter case, no dangerous projections of more than 9,5 mm shall remain; a cross-section not more than 6,5 mm from the point of maximum projection shall be not less than 6,5 cm2 in area. (see Annex X, explanatory notes, paragraph 5.1.5)