Betekenis van:
bilge pump
bilge pump
Zelfstandig naamwoord
- a pump to remove bilgewater
Hyperoniemen
Voorbeeldzinnen
- second bilge pump … l/min’
- Minimum pumping capacity first bilge pump … l/min
- The power-driven bilge pump replaces a fire pump … Yes/No (*)’
- the ship's emergency bilge pump and one of the fire pumps;
- the bilge water does not originate from cargo pump-room bilges;
- one independent bilge power pump and one of the fire pumps;
- .2.4 Each power bilge pump shall be capable of pumping water through the required main bilge pipe at a speed of not less than 2 m/sec.
- Provision shall be made to prevent any deep tank having bilge and ballast connections being inadvertently flooded from the sea when containing cargo, or being discharged through a bilge pump when containing water ballast.
- at one independent bilge power pump and one of the fire pumps, referred to in subparagraph (a) and at the starting position of their motors;
- at the emergency bilge pump and one of the fire pumps, referred to in subparagraph (a), and at the starting position of their motors;
- .2.10 Distribution boxes, cocks and valves in connection with the bilge pumping system shall be so arranged that, in the event of flooding, one of the bilge pumps may be operative on any compartment; in addition, damage to a pump or its pipe connecting to the bilge main outboard of a line drawn at one fifth of the breadth of the ship shall not put the bilge system out of action.
- .2.5 In addition to the direct bilge suction or suctions required by paragraph .2.4 a direct emergency bilge suction fitted with a non-return valve shall be led from the largest available independent power driven pump to the drainage level of the machinery space; the suction shall be of the same diameter as the main inlet to the pumps used.
- .2.5 In addition to the direct bilge suction or suctions required by paragraph .2.4 a direct emergency bilge suction fitted with a non-return valve shall be led from the largest available independent power-driven pump to the drainage level of the machinery space; the suction shall be of the same diameter as the main inlet to the pumps used.
- .2.3 With the exception of additional pumps which may be provided for peak compartments only, each required bilge pump shall be so arranged as to draw water from any space required to be drained by paragraph .1.1.
- .2 Where the bilge pumps are capable of being started automatically, means shall be provided to indicate when the influx of liquid is greater than the pump capacity or when the pump is operating more frequently than would normally be expected.