Betekenis van:
chamfer

Voorbeeldzinnen

1. Chamfer all edges
2. Sharp edge broken by radius or chamfer
3. The diameter of the upper cylinder may be reduced at the top to 400 mm when a chamfer not exceeding 30 degrees from the horizontal is included.
4. The width of the upper panel may be reduced at the top to 400 mm when a chamfer not exceeding 30 degrees from the horizontal is included.
5. Impact loading test machine with a vertically acting striker having an impacting face at least 125 mm wide and at least 375 mm long and sharp edges broken by radius or chamfer, in accordance with figure 1.
6. The diameter of the upper cylinder may be reduced at the top to 300 mm when a chamfer not exceeding 30 degrees from the horizontal is included (Figure 1).
7. The height of the upper cylinder and herewith the overall height may be reduced by 100 mm in any part of the gangway to the rear of:a) a transverse plane situated 1,5 m forward of the centre line of the rear axle (foremost rear axle in the case of vehicles with more than one rear axle), andb) a transverse vertical plane situated at the rear edge of the service door or of the rearmost service door if there are more than one service door.The diameter of the upper cylinder may be reduced at the top to 300 mm when a chamfer not exceeding 30 degrees from the horizontal is included.The gauging device may come into contact with strap hangers, if fitted, or other flexible objects such as seat belt components and move them away.