Betekenis van:
chipping

Werkwoord

Voorbeeldzinnen

1. From chipping come chips.
2. He alters the altar while chipping away the stone.
3. Max. chipping size
4. ASTM D3170-87 Chipping Resistance of Coatings;
5. The maximum chipping size shall be 8 mm (tolerances allow from 6,3 mm to 10 mm).
6. Wood simply sawn lengthwise or produced by a profile-chipping process; normally exceeds 6 mm in thickness.
7. The single-layered are tiles completely made of granulates or chipping of a suitable aggregate, embedded in grey and white cement and water.
8. The maximum chipping size shall be 10 mm (tolerances permitted from 8 mm to 13 mm) and the sand depth measured as specified in ASTM E-965 shall be 0,7 ± 0,3 mm.
9. Wood simply sawn lengthwise or produced by a profile-chipping process; normally exceeds 6 mm in thickness. NB: trade in sawn wood of special purpose timbers traded by weight (e.g. lignum vitae, Guaiacum spp.) should be recorded in kg.
10. After the test of resistance to atmospheric agents, the outer face of the samples shall be free from cracks, scratches, chipping and deformation, and the mean variation in transmission Δt = T2
11. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paragraphs 2.2.2., 2.3.1. and 2.3.2.);
12. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paragraphs 2.2.2, 2.3.1 and 2.3.2);
13. After the test of resistance to atmospheric agents, the outer face of the samples shall be free from cracks, scratches, chipping and deformation, and the mean variation in transmission Δt = (T2 – T3) / T2 measured on the three samples according to the procedure described in Appendix 2 to this annex shall not exceed 0,020 (Δtm ≤ 0,020).