Betekenis van:
coincident

Voorbeeldzinnen

1. The template shall be placed on the vehicle with Corners ‘A’ and ‘B’ coincident with the side reference line.
2. Appendix 1 — Approval according to Regulation No 117 coincident with approval to Regulations Nos 30 or 54
3. The particulate sampling and the gaseous emission measurement should not commence before engine stabilisation, as defined by the manufacturer, has been achieved and their completion must be coincident.
4. At the time of first contact the impactor centre line shall be coincident with the selected test point with a ±10 mm tolerance both laterally and vertically.
5. At the time of first contact the impactor centre line must be coincident with the selected test point with a ± 10 mm tolerance both laterally and vertically.
6. At the time of first contact the impactor centre line must be coincident with the selected impact position with a ± 10 mm tolerance (see Figure 10), and laterally with a tolerance of ± 10 mm.
7. At the time of first contact the impactor centre line shall be coincident with the selected impact position with a ±10 mm tolerance (see Figure 3), and laterally with a tolerance of ±10 mm.
8. Ensuring these two corners remain coincident with the side reference line, the template shall be slid progressively rearwards until the arc of the template makes first contact with the bonnet rear reference line.
9. At the time of first contact the impactor centre line shall be coincident with the bonnet leading edge reference line with a ±10 mm tolerance (see Figure 3), and laterally with the selected impact location with a tolerance of ±10 mm.
10. The tolerance to these directions is ± 2 °. At the time of first contact the impactor centre line must be coincident with the selected test point with a ± 10 mm tolerance both laterally and vertically. 4.4. The impact velocity of the impactor when striking the frontal protection system must be 11,1 ± 0,2 m/s.