Betekenis van:
coordinate axis

Voorbeeldzinnen

1. ‘Centreplane of occupant’ (C/LO) means the median plane of the 3-D H machine positioned in each designated seating position; it is represented by the coordinate of the ‘H’ point on the ‘Y’ axis.
2. ‘Centreplane of occupant’ (C/LO) means the median plane of the 3-D H machine positioned in each designated seating position; it is represented by the coordinate of the ‘H’ point on the ‘Y’ axis.
3. Rolling stock coordinates: rolling stock coordinates, figure 1, are based on the right hand rule Cartesian coordinate system, where the positive X-axis (longitudinal) is along the vehicle in the direction of travel, the Z-axis is vertically upwards and the origin is at the centre of the wheelset axle.
4. Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval. "Rotary atomisation" (1) means a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 micrometre or less by centrifugal force. "Roving" (1) is a bundle (typically 12-120) of approximately parallel 'strands'. N.B.:'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.
5. stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval. "Rotary atomisation" (1) means a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 micrometre or less by centrifugal force. "Roving" (1) is a bundle (typically 12-120) of approximately parallel "strands". N.B.:"strand" is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.
6. Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval. "Rotary atomisation" (1) means a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 micrometre or less by centrifugal force. "Roving" (1) is a bundle (typically 12-120) of approximately parallel ’strands’. N.B.:’Strand’ is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.