Betekenis van:
crankshaft

Voorbeeldzinnen

1. The crankshaft is broken.
2. As I turned the handle of the crankshaft, the old tractor sputtered to life.
3. Crankshaft or camshaft grinding machines.
4. Motor crankshaft maximum speed: … min-1
5. The length of the crankshaft from front flange to flywheel face;
6. The dimension of the crankshaft centre-line to the top plane of the valve cover (or cylinder head) plus twice the stroke; or
7. ‘net power’ means the power in ECE kW obtained on the test bench at the end of the crankshaft, or its equivalent, measured in accordance with the method of measuring power as set out in Regulation No 24.
8. ‘net power’ means the power in kW obtained on the test bench at the end of the crankshaft, or its equivalent, measured in accordance with the method of measuring power as set out in Regulation No 85;
9. ‘Net power’ means the power obtained on a test bench at the end of the crankshaft or its equivalent [1] at the corresponding engine speed with the auxiliaries listed in Table 1;
10. ‘Net power’ means the power obtained on a test bench at the end of the crankshaft or its equivalent at the corresponding engine or motor speed with the auxiliaries listed in table 1 of Annexes 5 or 6 to this Regulation, and determined under reference atmospheric conditions.
11. ‘net power’ means the power in EC kW obtained on the test bench at the end of the crankshaft, or its equivalent, measured in accordance with the EC method of measuring power as set out in Council Directive 80/1269/EEC of 16 December 1980on the approximation of the laws of the Member States relating to the engine power of motor vehicles [2];2.12.
12. “net power” means the power in EC kW obtained on the test bench at the end of the crankshaft, or its equivalent, measured in accordance with the EC method of measuring power as set out in Commission Directive 80/1269/EEC; “OBD” means an on-board diagnostic system for emission control, which has the capability of detecting the occurrence of a malfunction and of identifying the likely area of malfunction by means of fault codes stored in computer memory;
13. ‘net power’ means the power in EC kW obtained on the test bench at the end of the crankshaft, or its equivalent, measured in accordance with the EC method of measuring power as set out in Council Directive 80/1269/EEC of 16 December 1980on the approximation of the laws of the Member States relating to the engine power of motor vehicles [2];2.12. ‘declared maximum power (Pmax)’ means the maximum power in EC kW (net power) as declared by the manufacturer in his application for type-approval;
14. Overall positioning accuracy on the x-axis more (worse) than 30 μm. b. Machine tools for grinding, having any of the following characteristics: 1. Positioning accuracies with "all compensations available" equal to or less (better) than 4 μm according to ISO 230/2 (1988) [1] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established. or national equivalents along any linear axis; or 2. Two or more contouring rotary axes. Note: 2B201.b. does not control the following grinding machines: a. Cylindrical external, internal, and external-internal grinding machines having all of the following characteristics: 1. Limited to cylindrical grinding; 2. A maximum workpiece outside diameter or length of 150 mm; 3. Not more than two axes that can be coordinated simultaneously for "contouring control"; and 4. No contouring c axis; b. Jig grinders with axes limited to x, y, c and a where c axis is used to maintain the grinding wheel normal to the work surface, and the a axis is configured to grind barrel cams; c. Tool or cutter grinding machines with "software" specially designed for the production of tools or cutters; or d. Crankshaft or camshaft grinding machines. 2B204 "Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows: a. "Isostatic presses" having both of the following characteristics: 1. Capable of achieving a maximum working pressure of 69 MPa or greater; and 2. A chamber cavity with an inside diameter in excess of 152 mm; b. Dies, moulds and controls, specially designed for "isostatic presses" specified in 2B204.a. Technical Note: