Betekenis van:
curved
curved
Bijvoeglijk naamwoord
- having or marked by a curve or smoothly rounded bend
"the curved tusks of a walrus"
"his curved lips suggested a smile but his eyes were hard"
Synoniemen
Werkwoord
Voorbeeldzinnen
- The ball slightly curved.
- In General Relativity the observed global effect of gravity arises from strictly local interaction with curved space-time.
- It shall be applied on both straight track and curved track.
- The external part of these shields shall be directed downwards, and their upper part shall be curved.
- If the structure is curved or protruding at this point, wedges enabling the load to be applied thereon shall be added, without thereby reinforcing the structure.
- a surface, curved if necessary, whose generating line is perpendicular to the reference plane and rests on the back of the seat backrest.
- Unground Tragacanth gum occurs as flattened, lamellated, straight or curved fragments or as spirally twisted pieces 0,5-2,5 mm thick and up to 3 cm in length.
- artefacts due to the sampling system set-up; e.g. particle deposition in the sampling tube (especially for long or curved tubes).
- The permissible contact wire deviation under the action of a cross wind shall be calculated for contact wire heights above 5300 mm and/or on curved track.
- This requirement can be met by a distance between track centres of 3400 mm on straight track and curved track with a radius of 400 m or greater.
- If the structure is curved or protruding at this point, wedges enabling the impact to be applied thereon must be added, without thereby reinforcing the structure.
- Full square curved screen colour cathode-ray tube, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of 68 cm (± 2 mm)
- Full square curved screen colour cathode-ray tube, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of 68 cm (± 2 mm)
- Throughout the process, the template shall be curved to follow, as closely as possible, the outer contour of the vehicle's bonnet top, without wrinkling or folding of the template.
- Secure a 305 × 100 mm sample vertically in the test assembly, check that there is no space between the sample and the upper curved plate and that the tray is properly in position.