Betekenis van:
electrical contact

Voorbeeldzinnen

1. come into contact with hot components or electrical devices, which may produce electrical spark;
2. Metal anode button to enable electrical contact with the anode inside the colour picture tube
3. Pantographs transmit electrical energy from the overhead contact line system to the train on which they are installed.
4. More particularly the electrical properties of the on-board circuitry shall not be adversely affected by the addition of the immobilizer (lead cross-sections, contact safety, etc.).
5. Silver dag should be applied in at least three positions to improve the electrical contact at the edges of the filter and the stub.
6. sectioning points: electrical equipment located at intermediate locations between substations to supply and parallel overhead contact lines and to provide protection, isolation, auxiliary supplies;
7. overhead contact line system: a system that distributes the electrical energy to the trains running on the route and transmits it to the trains by means of pantographs.
8. Designed or modified to incorporate slip rings or integrated non-contact devices capable of transferring electrical power, signal information, or both; and
9. overhead contact line system: a system that distributes the electrical energy to the trains running on the route and transmits it to the trains by means of pantographs. The overhead contact line system is also equipped with manually or remotely controlled disconnectors which are required to isolate sections or groups of the overhead contact line system according to operational necessity.
10. overhead contact line system: a system that distributes the electrical energy to the trains running on the route and transmits it to the trains by means of pantographs. The overhead contact line system is also equipped with manually or remotely controlled disconnectors which are required to isolate sections or groups of the overhead contact line system according to operational necessity. Feeder lines are part of the overhead contact line system;
11. All the metallic parts of a freight wagon that are at risk from excessive contact voltages or being at risk of causing accidents caused by electrical charges of any origin, shall be held at the same voltage as the rail.
12. Centrifuges capable of imparting accelerations above 100 g and designed or modified to incorporate slip rings or integrated non-contact devices capable of transferring electrical power, signal information, or both.
13. Electrical safety of the overhead contact line system and protection against electric shock shall be achieved by compliance with EN 50119:2001 clause 5.1.2 and EN 50122-1:1997 clauses 4.1, 4.2, 5.1 (excluding 5.1.2.5), 5.2 and 7.
14. Pantographs transmit electrical energy from the overhead contact line system to the train on which they are installed. The pantograph is integrated into and put into service with the train, and is in the scope of the High Speed Rolling Stock TSI.
15. All electrical cables shall be so located that no part can make contact with any fuel line or any part of the exhaust system, or be subjected to excessive heat, unless suitable special insulation and protection is provided, as for example to a solenoid-operated exhaust valve.