Betekenis van:
electrical switch

Voorbeeldzinnen

1. Optical switch, comprising at least one optical input and two optical outputs and with electrical connectors
2. Potential inputs include external electrical stimulus (e.g. network stimulus, fax call, or remote control) and direct physical intervention (e.g. activating a physical switch or button).
3. Potential inputs include external electrical stimulus (e.g. network stimulus, fax call, remote control) and direct physical intervention (e.g. activating a physical switch or button).
4. OVC vehicles without an operating mode switch: the procedure shall start with the discharge of the electrical energy/power storage device of the vehicle while driving (on the test track, on a chassis dynamometer, etc.):
5. OVC vehicles with an operating mode switch: the procedure shall start with the discharge of the electrical energy/power storage device of the vehicle while driving with the switch in pure electric position (on the test track, on a chassis dynamometer, etc.) at a steady speed of 70 per cent ± 5 per cent from the maximum thirty minutes speed of the vehicle.
6. Where the voltage exceeds 100 Volts RMS (root mean square) in one or more electrical circuits in a vehicle, a manually-operated isolating switch which is capable of disconnecting all such circuits from the main electrical supply shall be connected in each pole of that supply which is not electrically connected to earth, and shall be located inside the vehicle in a position readily accessible to the driver, provided that no such isolating switch shall be capable of disconnecting any electrical circuit supplying the mandatory external vehicle lights.
7. All product features can be enabled in this mode, and the product must be able to return to active mode by responding to any potential input options designed into the product. Potential inputs include external electrical stimulus (e.g. network stimulus, fax call, or remote control) and direct physical intervention (e.g. activating a physical switch or button).
8. The procedure shall start with the discharge of the electrical energy/power storage device of the vehicle while driving with the switch in pure electric position (on the test track, on a chassis dynamometer, etc.) at a steady speed of 70 per cent ± 5 per cent of the maximum thirty minutes speed of the vehicle (determined according to Regulation No. 101).
9. All product features can be enabled in this mode and the product must be able to enter active mode by responding to any potential input options designed into the product; however, there may be a delay. Potential inputs include external electrical stimulus (e.g. network stimulus, fax call, remote control) and direct physical intervention (e.g. activating a physical switch or button).
10. If the vehicle is equipped with a pure electric operating state, the procedure shall start with the discharge of the electrical energy storage device of the vehicle while driving with the switch in pure electric position at a steady speed of 70 % +/– 5 % of the maximum thirty minutes speed of the vehicle.
11. If the vehicle is equipped with a pure electric mode, the discharge of the electrical energy storage device shall be achieved by driving the vehicle with the switch in pure electric position (on the test track, on a chassis dynamometer, etc.) at a steady speed corresponding to 70 % ± 5 % of the maximum speed indicated by manufacturer.
12. If the vehicle is equipped with a pure electric mode, the discharge of the electrical energy storage device shall be achieved by driving the vehicle with the switch in pure electric position (on the test track, on a chassis dynamometer, etc.) at a steady speed corresponding to 70 % ± 5 % of the maximum speed indicated by manufacturer. Stopping the discharge occurs in any of the following situations: