Betekenis van:
extremity

extremity
Zelfstandig naamwoord
    • the greatest or utmost degree
    "the extremity of despair"

    Hyperoniemen

    extremity
    Zelfstandig naamwoord
      • an extreme condition or state (especially of adversity or disease)

      Hyperoniemen

      Hyponiemen

      extremity
      Zelfstandig naamwoord
        • the outermost or farthest region or point

        Hyperoniemen

        Hyponiemen

        extremity
        Zelfstandig naamwoord
          • that part of a limb that is farthest from the torso

          Hyperoniemen

          Hyponiemen

          extremity
          Zelfstandig naamwoord
            • an external body part that projects from the body

            Synoniemen

            Hyperoniemen

            Hyponiemen


            Voorbeeldzinnen

            1. He was driven to the last extremity.
            2. As high as practicable, but within 400 mm of the upper extremity of the vehicle.
            3. the vehicle being leaned in order to bring the outer extremity of the prop stand into contact with the ground;
            4. Start the chronometer (stopwatch) and following the instructions for use of the product; direct the spray towards the centre of the opposite extremity (cover or plastic film).
            5. V ZP muscle depth: the minimal muscle depth between the anterior extremity of the muscle gluteus medius and the dorsal part of the medullar canal (in millimetres),
            6. The lower extremity of the pendulum consists of a rigid headform 165 mm in diameter whose centre is identical with the centre of percussion of the pendulum.
            7. The lower extremity of the pendulum consists of a rigid headform 165 mm in diameter whose centre is identical with the centre of percussion of the pendulum.1.2.2.
            8. The lower extremity of the pendulum consists of a rigid headform 165 mm in diameter whose centre is identical with the centre of percussion of the pendulum.
            9. The lower extremity of the pendulum consists of a rigid headform 165 mm in diameter whose centre is identical with the centre of percussion of the pendulum.1.2.2. The headform shall be fitted with two accelerometers and a speed-measuring device, all capable of measuring values in the direction of impact.
            10. The position of the centre of gravity of the block is 1/6 of the width of the top of the protective structure inwards from a vertical plane parallel to the median plane of the tractor touching the outside extremity of the top of the protective structure.
            11. The position of the centre of gravity of the block is 1/6 of the width of the top of the protective structure inwards from a vertical plan parallel to the median plane of the tractor touching the outside extremity of the top of the protective structure.
            12. This requirement will be satisfied if it is shown that both during and after the application of the forces described in Annex 5 the horizontal distance between the rear of the RUP and the rear extremity of the vehicle, including any platform lift mechanism, does not exceed 400 mm at any of the points where the test forces are applied.
            13. The point of application of the load shall be 1/6 of the width of the top of the protective structure inwards from a vertical plane parallel to the median plane of the tractor touching the outside extremity of the top of the protective structure.
            14. When the device has one outer edge of the illuminating surface that is parallel to the surface of the registration plate, the extremity of the illuminating surface of the device which is furthest from the surface of the plate is the middle point of the edge of the illuminating surface, which is parallel to the plate and is furthest from the surface of the plate.
            15. The manufacturer of the illuminating device shall specify one or more or a field of positions in which the device is to be fitted in relation to the space for the registration plate; when the lamp is placed in the position(s) specified by the manufacturer the angle of incidence of the light on the surface of the plate shall not exceed 82° at any point of the surface to be illuminated, this angle being measured from the extremity of the device's illuminating area which is furthest from the surface of the plate.