Betekenis van:
factor x

factor x
Zelfstandig naamwoord
    • coagulation factor that is converted to an enzyme that converts prothrombin to thrombin in a reaction that depends on calcium ions and other coagulation factors

    Synoniemen

    Hyperoniemen


    Voorbeeldzinnen

    1. The X factor was set by OFCOM.
    2. The factor ‘x’ referred to in paragraph 2.20 above;
    3. The factor x referred to in paragraph 2.20 above.
    4. If measured in a bandwidth of x MHz, this level is to be scaled down by a factor of 20log(50/x)dB;
    5. shall be taken to equal S1 multiplied by the factor x as specified by the manufacturer, and K shall be taken to equal 0.4.
    6. In the case of NOx, the NOx concentration (NOxconc or NOxconcc) has to be multiplied by KHNOx (humidity correction factor for NOx quoted in section 1.3.3) as follows: KHNOx x conc or KHNOx x concc
    7. as “x +/- U”, whereby x is the analytical result and U is the expanded measurement uncertainty, using a coverage factor of 2 which gives a level of confidence of approximately 95 %.’
    8. as ‘x +/- U’, whereby x is the analytical result and U is the expanded measurement uncertainty, using a coverage factor of 2 which gives a level of confidence of approximately 95 %.
    9. Thus, analytical results shall be reported as x +/– U whereby x is the analytical result and U is the expanded measurement uncertainty using a coverage factor of 2 which gives a level of confidence of approximately 95 %.
    10. Thus, analytical results shall be reported as x +/- U whereby x is the analytical result and U is the expanded measurement uncertainty using a coverage factor of 2 which gives a level of confidence of approximately 95 %.
    11. shall be taken to equal S1 multiplied by the factor x, as specified by the manufacturer, and K shall be taken to equal 0,4.
    12. In 1992, OFCOM had determined that the value of the X factor would be 7,5 % in each year from 1993/4 to 1996/7.
    13. For the dilute exhaust gas [13] In the case of NOx, the NOx concentration (NOxconc or NOxconcc) has to be multiplied by KHNOx (humidity correction factor for NOx quoted in section 1.3.3) as follows: KHNOx x conc or KHNOx x concc :
    14. ‘peak e.i.r.p. density’ means the peak level of transmission contained within a 50 MHz bandwidth centred on the frequency at which the highest mean radiated power occurs. If measured in a bandwidth of x MHz, this level is to be scaled down by a factor of 20log(50/x)dB;
    15. For the dilute exhaust gas [13] In the case of NOx, the NOx concentration (NOxconc or NOxconcc) has to be multiplied by KHNOx (humidity correction factor for NOx quoted in section 1.3.3) as follows: KHNOx x conc or KHNOx x concc