Betekenis van:
full stop

full stop
Zelfstandig naamwoord
  • leesteken zoals aan het eind v.e. zin
  • a punctuation mark (.) placed at the end of a declarative sentence to indicate a full stop or after abbreviations

Synoniemen

Hyperoniemen

Hyponiemen


Voorbeeldzinnen

  1. There is a full stop missing.
  2. The full stop is missing at the end of the sentence.
  3. In the first place, I discovered that beauty was a full stop.
  4. One should put a full stop at the end of the sentence.
  5. One should add a full stop at the end of the sentence.
  6. Can you add a full stop at the end of your sentence, please?
  7. When the vehicle comes to a full stop, the driver can resume the interface.
  8. in the definition ‘technical malfunction of TARGET2’, the full stop is replaced by a comma;
  9. In case of the tests for the additional letter D, the access probe may penetrate to its full length, but the stop face shall not fully penetrate through the opening.
  10. “Business Identifier Code (BIC)” means a code as defined by ISO Standard No 9362,’; (c) in the definition ‘technical malfunction of TARGET2’, the full stop is replaced by a comma;
  11. In case of the tests for the additional letter D, the access probe may penetrate to its full length, but the stop face shall not fully penetrate through the opening. See Annex A for further clarification.
  12. In addition, it will be important for Slovakia over the period of the NRP to focus on: further developing ICT policies, especially for broadband infrastructure; full implementation of one-stop shops for start-up companies; introducing entrepreneurship education; increasing competition in power supply; addressing the gender gap in pay and employment; developing an active ageing strategy; and creating job opportunities for young people.
  13. An operator shall ensure that the landing mass of the aeroplane determined in accordance with OPS 1.475(a) for the estimated time of landing allows a full stop landing from 50 ft above the threshold within 70 % of the landing distance available at the destination and any alternate aerodrome.
  14. An operator shall ensure that the landing mass of the aeroplane determined in accordance with OPS 1.475(a) for the estimated time of landing allows a full stop landing from 50 ft above the threshold within 70 % of the landing distance available at the destination aerodrome and at any alternate aerodrome.
  15. An operator shall ensure that the landing mass of the aeroplane determined in accordance with OPS 1.475 (a) for the estimated time of landing allows a full stop landing from 50 ft above the threshold within 70 % of the landing distance available at the destination aerodrome and at any alternate aerodrome.