Betekenis van:
g-force
g-force
Zelfstandig naamwoord
- a unit of force equal to the force exerted by gravity; used to indicate the force to which a body is subjected when it is accelerated
Synoniemen
Hyperoniemen
Werkwoord
Voorbeeldzinnen
- limit mass of particulates (limit mass in force, g/km);
- limit mass of particulates (limit mass in force, g/km)
- The vertical force Fs alternates between the limits +g × 1,2 U and +g × 0,4 U and the horizontal force between ±0,6 D.
- Former RCD-G General. Joined forces with other renegade elements of former RCD-G to take Bukavu in May 04 by force.
- Joined forces with other renegade elements of former RCD-G to take Bukavu in May 04 by force.
- Separation should preferably be made by centrifugation at a low g-force, sufficient to settle the algae.
- Joined forces with other renegade elements of former RCD-G to take Bukavu in May 2004 by force.
- Optional centrifuge capable of attaining a centrifugal force of 2200 g, fitted with stoppered or capped centrifuge tubes of about 50 ml capacity
- For bent drawbars (e. g. swan neck) and for the drawbars of full trailers, the horizontal force component Fhp = 1,0 × D shall be taken into consideration.
- The magnitude of this force shall be chosen so that a moment of 0,6 × Av × g (kNm) is exerted about the front axle centre.
- The sum of the braking forces exerted on the circumference of the trailer wheels shall not be less than B* = 0,50 g · GA, including a rolling resistance of 0,01 g · GA: this corresponds to a braking force B of 0,49 g · GA.
- Joined forces with other renegade elements of former RCD-G to take Bukavu in May 04 by force. In receipt of weapons outside of FARDC in violation of the arms embargo.
- Former FARDC Deputy Military Regional Commander of 10th MR in April 2004, dismissed for indiscipline and joined forces with other renegade elements of former RCD-G to take town of Bukavu in May 2004 by force.
- Joined forces with other renegade elements of former RCD-G to take Bukavu in May 2004 by force. In receipt of weapons outside of FARDC in violation of the arms embargo.
- In the case of Class G50 standard fifth wheel couplings and comparable couplings for the same coupling pin diameter, there shall not be any separation of the coupling pin from the coupling with a lifting force of Fa = g × 2,5 U. In the case of non-standard couplings using a pin diameter greater than 50 mm, for example 90 mm pin diameter couplings, the lifting force shall be: Fa = g × 1,6 U with a minimum value of 500 kN.