Betekenis van:
haze

haze
Zelfstandig naamwoord
  • mistige laag; waas van tranen of oogvocht
  • atmospheric moisture or dust or smoke that causes reduced visibility

Hyperoniemen

haze
Zelfstandig naamwoord
    • confusion characterized by lack of clarity

    Synoniemen

    Hyperoniemen

    to haze
    Werkwoord
      • harass by imposing humiliating or painful tasks, as in military institutions

      Hyperoniemen

      to haze
      Werkwoord
        • become hazy, dull, or cloudy

        Hyperoniemen


        Voorbeeldzinnen

        1. The haze enveloped London.
        2. My mind was in a haze after drinking so much.
        3. Because of the the dense haze, the road was hard to see.
        4. haze more than 70 % but not more than 80 %, determined by standard method JIS K7105 related to ASTM D1003
        5. Acidify a 2 % solution with hydrochloric acid, add 1 ml of an approximately molar solution of barium chloride in water and filter if any haze or precipitate forms.
        6. Services for creating or transforming images using computer-based spatial models, perspective transformations, and manipulations of image characteristics to improve visibility, sharpen resolution, and/or reduce the effects of cloud cover or haze.
        7. Polyethylene, in the form of granules, of a specific gravity of 0,925 (±0,0015), a melt flow index of 0,3 g/10 min (±0,05 g/10 min), for the manufacture of blown films of a Haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 [1]
        8. Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 [1]
        9. Soluble at temperatures above its melting point in toluene, dioxane, carbon tetrachloride, ether, methanol, ethanol and aniline; insoluble in petroleum ether and acetone; insoluble in cold water but dispersible in warm water; soluble with haze at temperatures above 50 oC in mineral oil and ethyl acetate
        10. Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 [1]
        11. Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 [1]
        12. Transparent polyethylene terephthalate film, coated on both sides by thin layers of 7-80 nm each of organic substances on the basis of acryl, giving good adhesion property with surface tension of 37 Dyne/cm, with a light transmission of more than 93 %, a haze value of less than 1,3 %, a total thickness of 125 μm or 188 μm and a width of 850 mm or more, but not more than 1600 mm