Betekenis van:
interpolation

interpolation
Zelfstandig naamwoord
  • woord dat vaak op zichzelf staat
  • the action of interjecting or interposing an action or remark that interrupts

Synoniemen

Hyperoniemen

interpolation
Zelfstandig naamwoord
  • onderbreking
  • the action of interjecting or interposing an action or remark that interrupts

Synoniemen

Hyperoniemen

interpolation
Zelfstandig naamwoord
    • a message (spoken or written) that is introduced or inserted
    "with the help of his friend's interpolations his story was eventually told"

    Synoniemen

    Hyperoniemen

    interpolation
    Zelfstandig naamwoord
      • (mathematics) calculation of the value of a function between the values already known

      Hyperoniemen

      interpolation
      Zelfstandig naamwoord
      • interruptie
      • the action of interjecting or interposing an action or remark that interrupts

      Synoniemen

      Hyperoniemen

      interpolation
      Zelfstandig naamwoord
      • interpolatie, inlas, insertie, intercalatie
      • the action of interjecting or interposing an action or remark that interrupts

      Synoniemen

      Hyperoniemen


      Voorbeeldzinnen

      1. Interpolation within one toxicity category
      2. Interpolation of NOx Control Point
      3. Figure 4: Interpolation of NOx Control Point
      4. (1988). An interpolation estimate for chronic toxicity: The ICp approach.
      5. Linear interpolation shall be made for intermediate speed values.
      6. For intermediate maximum speeds a linear interpolation of the maximum load rating is permissible.
      7. Intermediate response factors of TGs not present in the mixture can be calculated by mathematical interpolation.
      8. Norberg-King T.J. (1988). An interpolation estimate for chronic toxicity: The ICp approach.
      9. the flash-point can be accurately predicted by interpolation from existing characterised materials.
      10. All data points recorded under section 4.2.2. shall be connected using linear interpolation between points.
      11. All data points recorded under paragraph 1.2. must be connected using linear interpolation between points.
      12. The set points shall be calculated by linear interpolation between the 1 Hz set points of the reference cycle.
      13. If values are to be determined between adjacent reference or adjacent measured values, linear interpolation shall be used.
      14. The set points shall be calculated by linear interpolation between the 1 Hz set points of the reference cycle.
      15. If values are to be determined between adjacent reference or adjacent measured values, linear interpolation must be used.