Betekenis van:
lens system

Voorbeeldzinnen

1. Defective or missing projection system (reflector and lens).
2. Tests of the complete system incorporating a lens of plastic material
3. Lens and image gate assembly, for a real-time film scanning system, comprising a lens consisting of 9 or 11 elements and having an illumination function
4. The lens of system sample No 1 shall be subjected to the test described in paragraph 2.4.1. above.
5. In the case of dipped-beam headlamp, the minimum height in relation to the ground is measured from the lowest point of the effective outlet of the optical system (e.g. reflector, lens, projection lens) independent of its utilization.
6. When the television camera system is imported with the lens the free-at-Community-frontier value used in applying the anti-dumping duty shall be that of the television camera systems without the lens.
7. For a system or parts thereof with the outside lens in glass: A mixture of water and polluting agent to be applied to the test sample shall be composed of:
8. A light source may also be constituted by the extreme outlet of a light-guide, as part of a distributed lighting or light-signalling system not having a built-in outer lens;
9. For a system or parts thereof with the outside lens in plastic material: The mixture of water and polluting agent to be applied to the test sample shall be composed of:
10. In the case of a system designed to meet the requirements set out in paragraph 5.8.2. below by means of, or using additionally, an area on the front lens(es) of the installation unit(s) which can be occulted, this area must be outlined indelibly.
11. One or more lighting unit(s), with a class C passing beam with bending mode provided to work with one or more other installation unit(s) on the same side of the system (as indicated by the score above ‘C’) and a class V passing beam, both designed for right- and left-hand traffic and a driving beam with a maximum intensity comprised between 86250 and 101250 candelas (as indicated by the number 30), approved in accordance with the requirements of this Regulation in its original form (00) and incorporating a lens of plastic material;
12. A front position lamp approved in accordance with the 02 series of amendments of Regulation No 7; One or more lighting unit(s), with a class C passing beam with bending mode provided to work with one or more other installation unit(s) on the same side of the system (as indicated by the score above ‘C’) and a class V passing beam, both designed for right- and left-hand traffic and a driving beam with a maximum intensity comprised between 86250 and 101250 candelas (as indicated by the number 30), approved in accordance with the requirements of this Regulation in its original form (00) and incorporating a lens of plastic material;
13. Figure 7: the installation unit, bearing this approval mark is meeting the requirements of this Regulation in respect of the class C passing beam with class V passing beam and designed for left-hand traffic only. Figure 8: the installation unit, bearing this approval mark is a (separate) installation unit of a system, meeting the requirements of this Regulation in respect of the driving beam only. Example 5: Identification of an installation unit incorporating a lens of plastic material meeting the requirements of this Regulation
14. Figure 7: the installation unit, bearing this approval mark is meeting the requirements of this Regulation in respect of the class C passing beam with class V passing beam and designed for left-hand traffic only. Figure 8: the installation unit, bearing this approval mark is a (separate) installation unit of a system, meeting the requirements of this Regulation in respect of the driving beam only. Example 5: Identification of an installation unit incorporating a lens of plastic material meeting the requirements of this Regulation Figure 9 Figure 10 Figure 9 in respect to the class C passing beam, the class W passing beam both with :bending modes and a driving beam, and designed for right-hand traffic only. The passing beam and it modes shall not be operate simultaneously with the driving beam in and/or another reciprocally incorporated headlamp. Figure 10: in respect to the class E passing beam, the class W passing beam, designed for right-hand traffic only and a driving beam. The score above ‘E’ and ‘W’ indicates that these passing beam classes are provided on that side of the system by more than this installation unit.