Betekenis van:
lift off

Werkwoord

Voorbeeldzinnen

1. The blameless man walked out of the courtroom feeling a great weight lift off his shoulders, a triumphant smile on his lips.
2. Alternately, lift each foot off the floor the minimum necessary amount until no additional foot movement is obtained.
3. It does not include racing cars, vehicles intended for off-road use (for example, vehicles designed for use on snow or for carrying persons on golf courses), motorcycles, trailers, agricultural and forestry tractors, caravans, special purpose vehicles (for example, firefighting vehicles, mobile workshops), dump trucks, works' trucks (for example, fok lift trucks, straddle carrier trucks and platform trucks) and military vehicles intended for armies.
4. As regards the shipbuilding business, in the short term ISD Polska will target market segments such as container ships (small to medium-sized, 500–3000 TEU), general cargo vessels (‘classic’ vessels for the transportation of dry cargo, multipurpose vessels and heavy lift) and car carriers (large pure car carriers, size C6600) and will also develop activities in the off-shore vessels segment (e.g. anchor-handling towing supply vessels, platform supply vessels, crew boats), which should become dominant in the medium-term.
5. If any movement of the feet has occurred during the rocking operation of the 3-D H machine, they must be repositioned as follows: Alternately, lift each foot off the floor the minimum necessary amount until no additional foot movement is obtained. During this lifting, the feet are to be free to rotate; and no forward or lateral loads are to be applied. When each foot is placed back in the down position, the heel is to be in contact with the structure designed for this.
6. Make(s):4.3.2.4.2. Type(s):4.3.2.4.3. Speed at which cut-off starts under full load (2): … r/min4.3.2.4.4. Maximum no-load speed (2): … r/min4.3.2.4.5. Idling speed (2): … r/min4.3.3. Cold-start system4.3.3.1. Make(s):4.3.3.2. Type(s):4.3.3.3. Description:4.4. Valve timing4.4.1. Maximum lift and opening and closing angles in relation to top dead centre or equivalent data:4.4.2. Reference clearances and/or setting ranges (1):4.4.3. Variable valve timing system (if applicable and where intake and/or exhaust)4.4.3.1. Type: continuous or on/off4.4.3.2. Cam phase shift angle:4.5. Porting configuration4.5.1.
7. Make(s):4.3.2.4.2. Type(s):4.3.2.4.3. Speed at which cut-off starts under full load (2): … r/min4.3.2.4.4. Maximum no-load speed (2): … r/min4.3.2.4.5. Idling speed (2): … r/min4.3.3. Cold-start system4.3.3.1. Make(s):4.3.3.2. Type(s):4.3.3.3. Description:4.4. Valve timing4.4.1. Maximum lift and opening and closing angles in relation to top dead centre or equivalent data:4.4.2. Reference clearances and/or setting ranges (1):4.4.3. Variable valve timing system (if applicable and where intake and/or exhaust)4.4.3.1. Type: continuous or on/off4.4.3.2. Cam phase shift angle:4.5. Porting configuration4.5.1. Position, size and number:4.6. Electronic command functionsIf the engine features electronically controlled functions, information concerning their performance must be provided including:4.6.1. Make:4.6.2. Type:4.6.3. Part number:4.6.4. Location of engine electronic control unit:4.6.4.1. What does it sense:4.6.4.2. What does it control: ’;
8. Fuel feed3.2.3.1. Feed pumpPressure (2) or characteristic diagram: kPa3.2.3.2. Injection system3.2.3.2.1. Pump3.2.3.2.1.1. Make(s):3.2.3.2.1.2. Type(s):3.2.3.2.1.3. Delivery: mm3 (2) per stroke or cycle at pump speed of: r/min (rated) and r/min (maximum torque), respectively, or characteristic diagramState which method is used: on engine/on pump bench (1)3.2.3.2.1.4. Injection advance3.2.3.2.1.4.1. Injection advance curve (2):3.2.3.2.1.4.2. Timing (2):3.2.3.2.2. Injection piping3.2.3.2.2.1. Length: mm3.2.3.2.2.2. Internal diameter: mm3.2.3.2.3. Injector(s)3.2.3.2.3.1. Make(s):3.2.3.2.3.2. Type(s):3.2.3.2.3.3. Opening pressure (2) or characteristic diagram:3.2.3.2.4. Governor3.2.3.2.4.1. Make(s):3.2.3.2.4.2. Type(s):3.2.3.2.4.3. Speed at which cut-off starts under full load (2): r/min3.2.3.2.4.4. Maximum no-load speed (2): r/min3.2.3.2.4.5. Idling speed (2): r/min3.2.3.3Cold-start system3.2.3.3.1. Make(s):3.2.3.3.2. Type(s):3.2.3.3.3. Description:3.2.4. Valve timing3.2.4.1. Maximum lift and angles of opening and closing in relation to top dead centre or equivalent data:3.2.4.2. Reference clearances and/or setting ranges (1)