Betekenis van:
line of force

Voorbeeldzinnen

1. The value of brake pedal force ‘F’, at the point of intersection between this line and a horizontal line defined by a = aABS, is defined as FABS, extrapolated:
2. Overhead contact line shall be designed to be capable of sustaining this force curve for all pantographs on a train.
3. Note: Direction of alternating test force, Fhs res, depending on the location of the ball centre horizontal reference line in relation to the line parallel to this reference line — see Figure 21
4. The angle of application of the test force will vary, positive or negative, depending on the relationship of the ball centre horizontal reference line to the parallel line passing through the highest and nearest coupling device fixing point.
5. .5 In no case shall any subdivision load line mark be placed above the deepest load line in salt water as determined by the strength of the ship or the International Convention on Load Lines in force.
6. The test force shall be applied along a line passing through the centre of the ball and inclined downwards to the rear at 15o (see Figure 23).
7. The force needed to release the coupling, measured without the drawbar eye, shall not exceed 250 N perpendicular to the hand lever along the line of operation.
8. .4.2 The requirements of the International Convention on Load Lines in force shall apply to discharges led through the shell plating from spaces above the margin line.
9. The force needed to release the coupling, measured without the drawbar eye, shall not exceed 250 N perpendicular to the hand lever along the line of operation.
10. The line of action of the force shall pass through the centre of the smallest diameter of the cylindrical part of the coupling pin having a diameter of 50,8 mm for Class H50 (see Annex 5, Figure 18).
11. With regard to the likely effect on the situation of the Community industry of the expiry of the measures in force, a number of factors were taken into account in line with the elements summarised in recitals 31 and 32.
12. In accordance with Article 21(1) of the basic Regulation and in line with consistent practice of the Institutions since the current basic Regulation entered into force, this type of arguments are not part of the Community interest analysis.
13. With regard to the likely effect on the situation of the Community industry of the expiry of the measures in force, a number of factors were taken in line with the elements summarised in the recitals above.
14. The separation force, Fa, shall be applied perpendicular to both the transverse and longitudinal centre line axes of the coupling head and shall be increased smoothly and quickly to a value of:
15. In the light of the experience gained since that Regulation entered into force, a number of facilities for persons crossing the line should be relaxed and the trade in certain agricultural goods facilitated.