Betekenis van:
machine operation

machine operation
Zelfstandig naamwoord
    • an elementary operation that a computer is designed and built to perform

    Synoniemen

    Hyperoniemen

    Hyponiemen


    Voorbeeldzinnen

    1. The machine is safely in operation.
    2. The machine is now in operation.
    3. The operation of this machine is too difficult for me.
    4. We had the the procedures done yesterday but unfortunately, the machine won't be in operation until the engine is replaced.
    5. If any movement of the feet has occurred during the rocking operation of the 3-D H machine, they must be repositioned as follows:
    6. Certain auxiliaries, which are necessary only for the operation of the machine and may be mounted on the engine, should be removed for the test.
    7. Note 1: 2D002 does not control "software" specially designed or modified for the operation of machine tools not specified in Category 2.
    8. If any movement of the feet has occurred during the rocking operation of the 3-D H machine, they must be repositioned as follows:
    9. Service accumulation operating hours may be acquired through running engines on a dynamometer test bed or from actual in-field machine operation.
    10. Note 1:2D002 does not control "software" specially designed or modified for the operation of machine tools not specified in Category 2.
    11. If any movement of the feet has occurred during the rocking operation of the 3-D H machine, they must be repositioned as follows:
    12. If any movement of the feet has occurred during the rocking operation of the 3-D H machine, they must be repositioned as follows:
    13. Crompton comprised three production facilities with a total of six inclined wire paper machines in the UK: the Lydney mill with three inclined wire machines and a polypropylene fibre operation, the Simpson Clough Mill with two inclined wire machines and the Devon Valley Mill with one inclined wire machine and one flat wire machine.
    14. products used on the premises of a service provider, provided that consumers themselves actively operate a product (e.g. start the machine, have the option of stopping it, affect its operation by changing its position or intensity during use).
    15. "Software" for electronic devices, even when residing in an electronic device or system, enabling such devices or systems to function as a "numerical control" unit, capable of co-ordinating simultaneously more than four axes for "contouring control". Note 1:2D002 does not control "software" specially designed or modified for the operation of machine tools not specified in Category 2.