Betekenis van:
making water

Voorbeeldzinnen

1. Children enjoy making a splash in the water as they come off a waterslide.
2. She waited until the water boiled before making the tea with it.
3. Children enjoying making a splash in water as they come off a waterslide.
4. Making a clean separation between the "useful" and the "useless" is about as straightforward as drawing the fine line between water and ice.
5. Prepare a 1 g/l lead solution by dissolving 0,400 g of lead nitrate, Pb (NO3)2, in water and making up to 250 ml with water.
6. However all rescue boats shall be capable of being launched, where necessary utilising painters, with the ship making headway at speeds up to 5 knots in calm water.
7. promoting initiatives for the management of by-products of wine making and the management of waste in particular to protect the quality of water, soil and landscape and preserving or encouraging biodiversity;
8. the recommended quantities and/or dosage instructions expressed in millilitres or grams appropriate to a standard washing machine load, for soft, medium and hard water hardness levels and making provision for one or two cycle washing processes,
9. The relevant activities or sectors may be summed up as follows:electricity (production, transmission, distribution); gas (production, transport, distribution); heat (production, transport, distribution); hydrocarbons (exploration and extraction); coal and other solid fuels (exploration and extraction); drinking water (production, transport, distribution); urban transport (bus, underground etc.); railways (transport of persons and goods; making infrastructure available and management/operation of actual transport services); ports (seaports or inland ports, infrastructure to be made available and management/operation; airports (making infrastructure available and management/operation); and postal services.
10. Secure a 500 (+ 0/– 5) mm wide 750 mm high sample of the equipment to be tested to the vertical plate of the testing equipment, making sure that the sample lies well within the limits of the collector, and that no obstacle is able to deflect the water, either before or after its impact.
11. If lifeboat and rescue boat launching drills are carried out with the ship making headway, such drills shall, because of the dangers involved, be practised in sheltered waters only and under the supervision of an officer experienced in such drills, having regard to the guidelines in IMO Resolution A.624(15) “Guidelines on training for the purpose of launching lifeboats and rescue boats from ships making headway throw the water”, and the guidelines in IMO Resolution A.771(18) “Recommendations on training requirements for crews on fast rescue boats”.
12. The values of DF and TF chronic shall be as given in the Detergent Ingredient Database list-part A (DID list-part A) (Appendix I). If the ingredient in question is not included in the DID list part A, the applicant shall estimate the values following the approach described in the DID list part B (Appendix I). The CDVtox is summed for each ingredient, making the CDVtox for the product. The CDVtox of the recommended dose expressed for 1 litre of dishwashing water shall not exceed 4200 l. Assessment and verification: the exact formulation of the product shall be provided to the competent body, together with the details of the CDVtox calculations showing compliance with this criterion.
13. .3 The number of scuppers, sanitary discharges and other similar openings in the shell plating shall be reduced to the minimum either by making each discharge serve for as many as possible of the sanitary and other pipes, or in any other satisfactory manner. .4 All inlets and discharges in the shell plating shall be fitted with efficient and accessible arrangements for preventing the accidental admission of water into the ship. .4.1 Subject to the requirements of the International Convention on Load Lines in force, and except as provided in paragraph .5, each separate discharge led through the shell plating from spaces below the margin line shall be provided with either one automatic nonreturn valve fitted with a positive means of closing it from above the bulkhead deck or with two automatic nonreturn valves without positive means of closing, provided that the inboard valve is situated above the deepest subdivision load line and is always accessible for examination under service conditions. Where a valve with positive means of closing is fitted, the operating position above the bulkhead deck shall always be readily accessible and means shall be provided for indicating whether the valve is open or closed.