Betekenis van:
minimize

Voorbeeldzinnen

1. A new initiative strives to minimize accidents.
2. It may be impossible to get a completely error-free corpus due to the nature of this kind of collaborative effort. However, if we encourage members to contribute sentences in their own languages rather than experiment in languages they are learning, we might be able to minimize errors.
3. The driver-controlled switch shall be located so as to minimize any accidental manipulating.
4. Containment systems shall be designed, located and operated to minimize the risk of escape incidents.
5. NoteML15.f. includes equipment designed to degrade the operation or effectiveness of military imaging systems or to minimize such degrading effects.
6. What provisions in general have been made to minimize the quantities and harmfulness of residues resulting from incineration or co-incineration plants?
7. be located where water flow, depth and water-body exchange rates are adequate to minimize the impact on the seabed and the surrounding water body;
8. The requirements below apply to power-operation of windows/roof-panel systems/partition systems to minimize the possibility of injuries caused by accidental or improper operation.
9. To minimize baseline rising, the column shall be conditioned as specified in 5.2.2 (capillary column) or in Annex A.4 (packed column).
10. ‘For user safety: measures should be taken to minimize the production of breathable dust from this additive. Material safety data sheets (MSDS) available.’
11. If sampling units are not contiguous, they shall be placed as far apart as possible within the Level II plot or in its buffer zone in order to minimize spatial correlation between the sampling units within a plot.
12. Sampling and digitising considerations include pre-sampling amplification of signals to minimize digitising errors; number of bits per sample; number of samples per cycle; sample and hold amplifiers; and time-wise spacing of samples.
13. Where appropriate, uneaten fish-feed, faeces and dead animals shall be removed promptly to avoid any risk of significant environmental damage as regards water status quality, minimize disease risks, and to avoid attracting insects or rodents.
14. The sensor should be positioned at a height of 1,2 ± 0,1 m above the test surface level, to minimize the influence of the test surface thermal radiation at low airflows.
15. All parts of the dilution system and the sampling system from the exhaust pipe up to the filter holder, which are in contact with raw and diluted exhaust gas, shall be designed to minimize deposition or alteration of the particulates.