Betekenis van:
normal fault
normal fault
Zelfstandig naamwoord
- an inclined fault in which the hanging wall appears to have slipped downward relative to the footwall
Synoniemen
Hyperoniemen
Voorbeeldzinnen
- This information shall show that ‘The System’ respects, under normal and fault conditions, all the appropriate performance requirements specified elsewhere in this Regulation.
- Any single error in operation or the occurrence of any single fault in the system shall not result in accidental opening of the coupling during normal road use.
- To resolve the problem, which is not the fault of the producers, and pending the normal relaunch of that central computer system, those producers should be granted an extension for the submission of harvest and production declarations.
- Alarms shall be maintained until they are accepted and the visual indications of individual alarms shall remain until the fault has been corrected, when the alarm system shall automatically reset to the normal operating condition.
- Alarms shall be maintained until they are accepted and the visual indications of individual alarms shall remain until the fault has been corrected, when the alarm system shall automatically reset to the normal operating condition. 7 Safety systems (R 52)
- As the means of establishing the normal operational levels, verification of the performance of the vehicle system under non-fault conditions shall be conducted against the manufacturer's basic benchmark specification unless this is subject to a specified performance test as part of the approval procedure of this or another Regulation.
- .2.2 Failure of the normal power supply of the alarm system shall be indicated by an alarm. .3.1 The alarm system shall be able to indicate at the same time more than one fault and the acceptance of any alarm shall not inhibit another alarm.
- .3.2 Acceptance at the position referred to in paragraph .1 of any alarm condition shall be indicated at the positions where it was shown. Alarms shall be maintained until they are accepted and the visual indications of individual alarms shall remain until the fault has been corrected, when the alarm system shall automatically reset to the normal operating condition.