Betekenis van:
oil pressure

Voorbeeldzinnen

1. Engine oil pressure
2. Separate specific purpose telltales (e. g. brake system, fasten seat belt, oil pressure, etc.) are permitted.
3. .20 Oil fuel unit is the equipment used for the preparation of oil fuel for delivery to an oil-fired boiler, or equipment used for the preparation for delivery of heated oil to an internal combustion engine, and includes any oil pressure pumps, filters and heaters dealing with oil at a pressure of more than 0,18 N/mm2.
4. The test has to be completed with circulating oil having a temperature of 93 °C, and a minimum pressure of 1,5 times the maximum working pressure.
5. Precautions shall be taken to prevent any oil that may escape under pressure from any pump, filter or heater from coming into contact with heated surfaces.
6. For valves, fitted to oil fuel tanks and which are under static pressure, steel or spheroidal-graphite cast iron may be accepted.
7. .4 Provision shall be made to reduce to a minimum the entry of oil into the air pressure systems and to drain these systems.
8. auxiliary machinery spaces as in category (10) which contain machinery having a pressure lubrication system or where storage of combustibles is permitted, oil fuel filling stations,
9. In order to avoid placing unnecessary pressure on the oil market, such replenishment is expected to take place over an extended period of time, including the year 2006.
10. The test has to be completed with circulating oil having a temperature of 93 °C, and a minimum pressure of 26 MPa.
11. .4 Provisions shall be made to reduce to a minimum the entry of oil into the air pressure systems and to drain these systems.
12. The test has to be completed with circulating oil having a temperature of 93 °C, and a minimum pressure of 3000 kPa.
13. oil level of the hydraulic tanks falling under the lowest content level in accordance with Article 6.03(2) and decrease of service pressure of the hydraulic system;’
14. The test has to be completed with circulating oil having a temperature of 93 °C, and a minimum pressure of 1015 kPa.
15. .1.1 As far as practicable, parts of the oil fuel system containing heated oil under pressure exceeding 0,18 N/mm2 shall not be placed in a concealed position such that defects and leakage cannot readily be observed.