Betekenis van:
one-liner

Voorbeeldzinnen

1. One liner shall be hydrostatically burst in accordance with paragraph A.12. (appendix A). The burst pressure shall exceed the minimum burst pressure specified for the liner design;
2. One liner shall be hydrostatically burst in accordance with paragraph A.12.
3. One liner shall be hydrostatically burst in accordance with paragraph A.12. (appendix A).
4. One cylinder, or liner, or liner witness sample that is representative of a finished cylinder, shall be subjected to the following tests:
5. Batch materials tests. One cylinder, or liner, or heat treat witness sample that is representative of a finished cylinder, shall be subjected to the following tests:
6. This Regulation shall apply to consortia only in so far as they provide international liner shipping services from or to one or more Community ports. Article 2
7. One tensile test of the plastic liner in accordance with paragraph A.22 (appendix A) and meet the requirements of the design;
8. This Regulation shall apply to consortia only in so far as they provide international liner shipping services from or to one or more Community ports.
9. One cylinder, or liner, or heat treat witness sample that is representative of a finished cylinder, shall be subjected to the following tests:
10. The liner shipping conference block exemption provided for in Regulation (EEC) No 4056/86 exempts from the prohibition of Article 81(1) of the Treaty agreements, decisions and concerted practices of all or part of the members of one or more liner conferences which fulfil certain conditions.
11. For the purposes of this Regulation a consortium agreement consists of one or a set of separate but interrelated agreements between liner shipping companies under which the parties operate the joint service.
12. Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm
13. Black polyvinyl chloride film having a high gloss of more than 90 degrees as determined by test method ASTM D 2457 covered on one side with a protective polyethylene terephthalate film and on the other side a pressure sensitive adhesive with channels and a polyethylene terephthalate release liner
14. ex39199061[2] ylene terephtalate) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side having an antistatic layer of ionic based organic compound choline and a printable dust-proof layer of modified long chain alkyl organic compound, having a total thickness without the liner of 54 μm or more but not more than 64 μm and a width of more than 1295 mm but not more than 1305 mm
15. Transparent poly(ethylene terephthalate) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side having an antistatic layer of ionic based organic compound choline and a printable dust-proof layer of modified long chain alkyl organic compound, having a total thickness without the liner of 54 μm or more but not more than 64 μm and a width of more than 1295 mm but not more than 1305 mm