Betekenis van:
overheating

overheating
Zelfstandig naamwoord
  • het te erg verhit zijn
  • excessive heating

Hyperoniemen

Hyponiemen

Werkwoord


Voorbeeldzinnen

  1. The disadvantage of excellent insulation is that it quickly leads to overheating.
  2. Overheating
  3. Aerate wet grain to avoid overheating prior to drying.
  4. maintains economic and budgetary sustainability by pursuing a more restrictive fiscal policy, so as to contribute to the prevention of overheating and a careful prioritisation of expenditure,
  5. If the vehicle is equipped with a device to limit the performance in an emergency (e.g. overheating of a component) the user shall be informed by an obvious signal.
  6. Machinery must be designed and constructed in such a way as to avoid any risk of fire or overheating posed by the machinery itself or by gases, liquids, dust, vapours or other substances produced or used by the machinery.
  7. pursue a more restrictive fiscal policy, with a careful prioritisation of expenditures and wage developments that are in line with productivity, in order to contribute to correcting overheating pressures and reducing the risk of macroeconomic instability,
  8. All work equipment must be appropriate for protecting workers against the risk of the work equipment catching fire or overheating, or of discharges of gas, dust, liquid, vapour or other substances produced, used or stored in the work equipment.
  9. To that end, there should be focus on measures which avoid overheating, such as shading and sufficient thermal capacity in the building construction, and further development and application of passive cooling techniques, primarily those that improve indoor climatic conditions and the micro-climate around buildings.
  10. Crusher made of a material which does not absorb moisture, is easy to clean, enables crushing to be effected quickly and evenly without overheating, limits contact with the outside air to the minimum, and meets the requirements mentioned in 2 (e.g. a detachable roller mill).
  11. For DC 1,5 kV systems, the overhead contact line shall be designed to withstand a static contact force of 140 N per pantograph in order to avoid overheating of the contact wire with a train at standstill with its auxiliaries working.
  12. The heating system shall apply heat evenly to the tank walls beneath the level of the fuel so as not to cause local overheating of the fuel. Heat shall not be applied to the vapour in the tank above the fuel.
  13. In terms of OBD monitoring it is that percentage of misfires out of a total number of firing events (as declared by the manufacturer) that would result in emissions exceeding the limits given in paragraph 3.3.2. or that percentage that could lead to an exhaust catalyst, or catalysts, overheating causing irreversible damage.
  14. The policy areas in the Romanian NRP where challenges need to be tackled with the highest priority are: strengthening administrative capacity, addressing overheating and improving budget planning and the quality of expenditure; cutting red tape and activating labour supply and raising skill levels.