Betekenis van:
pitch in
to pitch in
Werkwoord
Synoniemen
Hyperoniemen
Werkwoord
Voorbeeldzinnen
- What began 21 months ago in the depths of winter cannot end on this autumn night. This victory alone is not the change we seek. It is only the chance for us to make that change. And that cannot happen if we go back to the way things were. It can't happen without you, without a new spirit of service, a new spirit of sacrifice. So let us summon a new spirit of patriotism, of responsibility, where each of us resolves to pitch in and work harder and look after not only ourselves but each other.
- .2 propeller speed and pitch position in the case of controllable pitch propellers;
- .2 propeller speed and pitch position in the case of controllable pitch propellers; and
- Soap stocks, oil foots and dregs, stearin pitch, glycerol pitch and wool grease residues fall in heading 1522.
- .8.1 propeller speed and direction of rotation in the case of fixed pitch propellers, and
- Work involving exposure to polycyclic aromatic hydrocarbons present in coal soot, coal tar or coal pitch.
- internal tilt compensation in pitch (±90 degrees) and roll (±180 degrees) axes;
- (The redistillate obtained from the fractional distillation of pitch distillate boiling in the range of approximately 350 to 400 °C.
- (Residue from the fractional distillation of pitch distillate boiling in the range of approximately 400 to 470 °C.
- The two principal raw materials in the manufacturing of graphite electrode systems, namely petroleum coke and pitch, account for around 34 % of total costs of production.
- [The redistillate obtained from the fractional distillation of pitch distillate boiling in the range of approximately 350 oC to 400 oC (662 oF to 752 oF).
- [Residue from the fractional distillation of pitch distillate boiling in the range of approximately 400 oC to 470 oC (752 oF to 846 oF).
- the characteristics of motion of the actual ship should be modelled properly, paying particular attention to the intact GM tolerance and radii of gyration in roll and pitch motion. Both radii should be measured in air and be in the range of 0,35B to 0,4B for roll motion, and 0,2LOA to 0,25LOA for pitch motion;
- The criteria used are the following: the diagonal measurement of the viewable screen in inches, the width/height aspect ratio, the tube type (bulb, flat screen or flat slim), the pitch size in millimetres and the frequency).
- Note 1: Adjustable flow path geometry and associated control systems in 9E003.a.10. do not include inlet guide vanes, variable pitch fans, variable stators or bleed valves for compressors.