Betekenis van:
reflectance
reflectance
Zelfstandig naamwoord
- the fraction of radiant energy that is reflected from a surface
Synoniemen
Hyperoniemen
Voorbeeldzinnen
- Meter with adjustments Reflectance %
- Equipment for measuring absolute reflectance to an accuracy of ± 0,1 % of the reflectance value;
- Equipment for measuring absolute reflectance to an accuracy of ±0,1 % of the reflectance value;
- light responsive dimming (for daylight and/or room reflectance variations),
- The reflectance value is read directly from the indicating meter.
- Optical equipment, as follows: a. equipment for measuring absolute reflectance to an accuracy of ±0,1 % of the reflectance value;
- Cadmium and lead in filter glasses and glasses used for reflectance standards
- Crumpled euro banknotes can normally be identified if their level of reflectance or stiffness is reduced.
- Cleanness can be measured visually, photometrically (e.g. measuring reflectance), gravimetrically or by means of another relevant method.
- The term “hard coal” refers to coal of gross calorific value greater than 23865 kJ/kg (5700 kcal/kg) on an ashfree but moist basis and with a mean random reflectance of vitrinite of at least 0,6.
- The term ‘hard coal’ refers to coal of gross calorific value greater than 23865 kJ/kg (5700 kcal/kg) on an ashfree but moist basis and with a mean random reflectance of vitrinite of at least 0,6.
- The entrance port shall be circular and have a diameter at least twice that of the light beam. The exit port of the sphere shall be provided with either a light trap or a reflectance standard, according to the procedure described in paragraph 4.4.3 below.
- Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 μm
- Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 μm