Betekenis van:
retract
to retract
Werkwoord
- pull away from a source of disgust or fear
Synoniemen
Hyperoniemen
Voorbeeldzinnen
- I would like to retract my previous statement.
- If the device to operate the step fails, the step shall retract and remain in the retracted position.
- Shelves and other similar items shall, under the effect of a forward-acting horizontal longitudinal force of 37.8 daN exerted by a cylinder of 110 mm diameter with its axis vertical, become detached, break up, be substantially distorted or retract without producing dangerous features on the rim of the shelf.
- If the vehicle is fitted with a badge, mascot or other structure which would bend back or retract under an applied load of maximum 100 N, then such a load shall be applied before and/or while these measurements are taken.
- Shelves and other similar items shall, under the effect of a forward-acting horizontal longitudinal force of 37.8 daN exerted by a cylinder of 110 mm diameter with its axis vertical, become detached, break up, be substantially distorted or retract without producing dangerous features on the rim of the shelf. The force must be directed at the strongest part of the shelves or other similar items.
- Shelves and other similar items shall, under the effect of a forward-acting horizontal longitudinal force of 37.8 daN exerted by a cylinder of 110 mm diameter with its axis vertical, become detached, break up, be substantially distorted or retract without producing dangerous features on the rim of the shelf. The force must be directed at the strongest part of the shelves or other similar items. (see Annex X, explanatory notes, paragraph 5.2.3.2)
- If these components project by more than 9,5 mm from the surface of the instrument panel, they shall be so designed and constructed as to be able, under the effect of a longitudinal horizontal force of 37.8 daN delivered by a flat-ended ram of not more than 50 mm diameter, either to retract into the surface of the panel until they do not project by more than 9,5 mm or to become detached; in the latter case, no dangerous projections of more than 9,5 mm shall remain; a cross-section not more than 6,5 mm from the point of maximum projection shall be not less than 6,5 cm2 in area.
- If these components project by more than 9,5 mm from the surface of the instrument panel, they shall be so designed and constructed as to be able, under the effect of a longitudinal horizontal force of 37.8 daN delivered by a flat-ended ram of not more than 50 mm diameter, either to retract into the surface of the panel until they do not project by more than 9,5 mm or to become detached; in the latter case, no dangerous projections of more than 9,5 mm shall remain; a cross-section not more than 6,5 mm from the point of maximum projection shall be not less than 6,5 cm2 in area. (see Annex X, explanatory notes, paragraph 5.1.5)