Betekenis van:
rotate
to rotate
Werkwoord
- turn outward
"ballet dancers can rotate their legs out by 90 degrees"
Synoniemen
Hyperoniemen
to rotate
Werkwoord
- exchange on a regular basis
"We rotate the lead soprano every night"
Hyperoniemen
to rotate
Werkwoord
- plant or grow in a fixed cyclic order of succession
"We rotate the crops so as to maximize the use of the soil"
Hyperoniemen
to rotate
Werkwoord
- perform a job or duty on a rotating basis
"Interns have to rotate for a few months"
Hyperoniemen
to rotate
Werkwoord
- cause to turn on an axis or center
Synoniemen
Hyperoniemen
Hyponiemen
Voorbeeldzinnen
- Rotate your screen to see other images.
- Rotary axes need not rotate over 360°.
- Drawbar eyes shall not be able to rotate axially (because the respective couplings can rotate).
- The test fixture shall rotate about an axis lying parallel to the longitudinal vehicle axis.
- Each wheel must be able to rotate freely round its pivot-centre.
- The suspension of the headform impactor shall be such that it does not rotate during the fall.
- The tyres fitted to the test vehicle shall rotate in the same direction as when they were run-in.
- In order to reinforce the independence of auditors of public-interest entities, the key audit partner(s) auditing such entities should rotate.
- The rotating test platform shall have a minimum diameter of 140 mm and rotate about a vertical axis in the centre of the cabinet.
- The voting rights within each group shall rotate every month, starting on the first day of the first month of the implementation of the rotation system.
- If another level adjustment of the 3-D H machine is necessary, rotate the back pan forward, re-level, and repeat the procedure from paragraph 4.12.
- Rotary axes need not rotate over 360°. A rotary axis can be driven by a linear device (e.g., a screw or a rack-and-pinion).
- If another level adjustment of the 3-D H machine is necessary, rotate the back pan forward, re-level, and repeat the procedure from paragraph 4.12.
- If another level adjustment of the 3-D H machine is necessary, rotate the back pan forward, re-level, and repeat the procedure from 4.12.
- Rotary axes need not rotate over 360°. A rotary axis can be driven by a linear device (e.g. a screw or a rack-and-pinion).