Betekenis van:
seating area

Voorbeeldzinnen

1. However, the vertical distance between the gangway surface and the floor of the seating area shall not exceed 350 mm.
2. The transition from a sunken gangway to a seating area shall not be considered to be a step.
3. Any transition from a sunken gangway to a seating area shall not be considered to be a step.
4. the area forward of a transverse vertical plane passing through the centre of the seating surface of the driver's seat (in its rearmost position);
5. If a vehicle is designed to have a variable number of seating places, area available for standing passengers or number of wheelchairs carried, the requirements of paragraph 7.2.3.1. shall apply to each maximum seating capacity and the corresponding number of wheelchairs and standing passengers as appropriate.
6. The Administration of the flag State may permit additional seating in the main reception area within a stairway enclosure, if it is fixed, non-combustible, and does not restrict the passenger escape route.
7. In the case of a vehicle equipped with a variable seating capacity the area available for standing passengers (S1) and the provisions of paragraph 7.2.3. shall be determined for each of the following conditions as applicable:
8. for deck areas with fixed seating furniture such as benches, ni shall be calculated by assuming an area of 0,50 m in width and 0,75 m in seat depth per person’
9. The Administration of the flag State may permit additional seating in the main reception area within a stairway enclosure if it is fixed, non-combustible and does not restrict the passenger escape route.
10. However, in case of tyres identified by the ‘tyre to rim fitment configuration’ (see para. 3.1.10) symbol ‘A’ or ‘U’, it means the area of the tyre which is seating on the rim.
11. However, in case of tyres identified by the ‘tyre to rim fitment configuration’ (see paragraph 3.1.11) symbol ‘A’, it means the area of the tyre which is seating on the rim.
12. If the maximum approved passenger seating configuration is more than 200 an additional crash axe or crowbar must be carried and located in or near the most rearward galley area.
13. In the case of seats or bench seats with integrated head restraints, area 2 shall extend above a plane perpendicular to the reference line 440 mm distant from the R point of the seat or of the seating position concerned, other than parts of area 1.
14. the area 300 mm in front of all seats other than folding seats, except where a sideways-facing seat is situated above the wheel arch, in which case this dimension may be reduced to 225 mm. In the case of variable seating arrangements, of any seat when considered to be in use, see paragraph 7.2.2.4;
15. The area of the seating position contacted by the 3-D H machine shall be covered by a muslin cotton, of sufficient size and appropriate texture, described as a plain cotton fabric having 18,9 threads per cm2 and weighing 0,228 kg/m2 or knitted or non-woven fabric having equivalent characteristics.