Betekenis van:
short-circuit

to short-circuit
Werkwoord
  • bij iedereen komen
  • avoid something unpleasant or laborious

Synoniemen

Hyperoniemen

to short-circuit
Werkwoord
  • kortsluiting veroorzaken
  • create a short circuit in

Synoniemen

Hyperoniemen

to short-circuit
Werkwoord
    • hamper the progress of; impede
    "short-circuit warm feelings"

    Hyperoniemen


    Voorbeeldzinnen

    1. The circulatory system consists of a short and a long circuit.
    2. The audience believed it to be part of the act, rather than a short circuit.
    3. the fuel-injection system electronic, fuel quantity and timing actuator(s) for circuit continuity (i.e. open circuit or short circuit) and total functional failure.
    4. The battery terminals shall be protected against the risk of short circuit.
    5. .5 short circuit protection only shall be provided for steering gear control supply circuits.
    6. All electrical connections of the VAS must be short-circuit proof against earth, maximum 13 V and/or fused.
    7. The electrification system needs to be designed so that the subsystem controls detect these faults immediately and trigger measures to remove the short-circuit current and isolate the affected part of the circuit.
    8. Electrical resistance between all metal parts of the rolling stock and the rail shall be low enough to ensure that rising short circuit current will cause disconnection of circuit line breaker (e. g. when the catenary falls on a wagon).
    9. With the lamp switched off and the electrical measuring circuit open or short-circuited, the reading on the absorption-coefficient scale shall be ∞, and it shall remain at ∞ with the measuring circuit reconnected.
    10. .3 Short-circuit protection and an overload alarm shall be provided for steering gear electric and electro-hydraulic circuits and motors.
    11. means are provided to ensure that any fault (e.g. power break, short circuit, earth) occurring in the loop will not render the whole loop ineffective,
    12. The heating cords can come into contact with each other, can cause a short-circuit and set the bedclothes on fire. Finally, the packaging of the product should also be included in any risk assessment.
    13. .7.7 Electric power, control, indication and alarm circuits shall be protected against fault in such a way that a failure in one door circuit will not cause a failure in any other door circuit. Short circuits or other faults in the alarm or indicator circuits of a door shall not result in a loss of power operation of that door. Arrangements shall be such that leakage of water into the electrical equipment located below the bulkhead deck will not cause the door to open.
    14. .7 Any main and auxiliary steering gear control system operable from the navigating bridge shall comply with the following: .1 if electric, it shall be served by its own separate circuit supplied from a steering gear power circuit from a point within the steering gear compartment, or directly from switchboard busbars supplying that steering gear power circuit at a point on the switchboard adjacent to the supply to the steering gear power circuit; .2 means shall be provided in the steering gear compartment for disconnecting any control system operable from the navigating bridge from the steering gear it serves; .3 the system shall be capable of being brought into operation from a position on the navigating bridge; .4 in the event of a failure in the electrical power supply to the control system, an audible and visual alarm shall be given on the navigating bridge; and .5 short-circuit protection only shall be provided for steering gear control supply circuits. .8 The electrical power circuits and the steering gear control systems with their associated components, cables and pipes required by this regulation and by Regulation 7 shall be separated as far as is practicable throughout their length.
    15. "Melt Extraction" (1) means a process to ’solidify rapidly’ and extract a ribbon-like alloy product by the insertion of a short segment of a rotating chilled block into a bath of a molten metal alloy. N.B.:’Solidify rapidly’: solidification of molten material at cooling rates exceeding 1,000 K/s. "Melt Spinning" (1) means a process to ’solidify rapidly’ a molten metal stream impinging upon a rotating chilled block, forming a flake, ribbon or rod-like product. N.B.:’Solidify rapidly’: solidification of molten material at cooling rates exceeding 1,000 K/s. "Microcomputer microcircuit" (3) means a "monolithic integrated circuit" or "multichip integrated circuit" containing an arithmetic logic unit (ALU) capable of executing general purpose instructions from an internal storage, on data contained in the internal storage. N.B.:The internal storage may be augmented by an external storage. "Microprocessor microcircuit" (3) means a "monolithic integrated circuit" or "multichip integrated circuit" containing an arithmetic logic unit (ALU) capable of executing a series of general purpose instructions from an external storage.