Betekenis van:
spectrum analysis

Voorbeeldzinnen

1. The analysis conducted in the light of Article 87(3)(c) has identified two potential market failures specific to the digital switch-over of the terrestrial broadcasting platform: coordination problems between the different market players in achieving a smooth switch-over process and positive externalities associated with the freeing-up of frequency spectrum.
2. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (2 3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data.
3. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data.
4. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (2 3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest "real-time bandwidth" shall be used to make the calculation.
5. "Drift rate" (gyro) (7) means the component of gyro output that is functionally independent of input rotation. It is expressed as an angular rate. (IEEE STD 528-2001). "Dynamic adaptive routing" (5) means automatic rerouting of traffic based on sensing and analysis of current actual network conditions. N.B.:this does not include cases of routing decisions taken on predefined information. "Dynamic signal analysers" (3) means "signal analysers" which use digital sampling and transformation techniques to form a Fourier spectrum display of the given waveform including amplitude and phase information. N.B.:see also "signal analysers".
6. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest "real-time bandwidth" shall be used to make the calculation.
7. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest "real-time bandwidth" shall be used to make the calculation. "Real time processing" (6 7) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event.
8. "Direct-acting hydraulic pressing" (2) means a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece. "Drift rate" (gyro) (7) means the component of gyro output that is functionally independent of input rotation. It is expressed as an angular rate. (IEEE STD 528-2001). "Dynamic adaptive routing" (5) means automatic rerouting of traffic based on sensing and analysis of current actual network conditions. N.B.:This does not include cases of routing decisions taken on predefined information. "Dynamic signal analysers" (3) means "signal analysers" which use digital sampling and transformation techniques to form a Fourier spectrum display of the given waveform including amplitude and phase information. N.B.:See also "signal analysers". "Effective gramme" (0 1) of "special fissile material" means:
9. "Digital transfer rate" (5) means the total bit rate of the information that is directly transferred on any type of medium. N.B.:See also "total digital transfer rate". "Direct-acting hydraulic pressing" (2) means a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece. "Drift rate" (gyro) (7) means the component of gyro output that is functionally independent of input rotation. It is expressed as an angular rate. (IEEE STD 528-2001). "Dynamic adaptive routing" (5) means automatic rerouting of traffic based on sensing and analysis of current actual network conditions. N.B.:This does not include cases of routing decisions taken on predefined information. "Dynamic signal analysers" (3) means "signal analysers" which use digital sampling and transformation techniques to form a Fourier spectrum display of the given waveform including amplitude and phase information. N.B.:See also "signal analysers". "Effective gramme" (0 1) of "special fissile material" means:
10. The analysis conducted in the light of Article 87(3)(c) has identified two potential market failures specific to the digital switch-over of the terrestrial broadcasting platform: coordination problems between the different market players in achieving a smooth switch-over process and positive externalities associated with the freeing-up of frequency spectrum. While these market failures may, in principle, justify a departure from the principle of technological neutrality, they cannot serve as justification for the aid granted in the present case. Accordingly, the Commission is not convinced that the aid is an appropriate, necessary and proportionate instrument to remedy a market failure and to promote the roll-out of DVB-T. Even if account is taken of the fact that the amount of aid is relatively low in absolute terms and that the distortion of competition at broadcasting level is rather limited, the aid amounts, in case of some channels, to close to half of the transmission costs and may have influenced the choice of broadcasters in favour of the DVB-T platform, thereby causing a more important distortion of competition at network level.
11. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (2 3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest "real-time bandwidth" shall be used to make the calculation. "Real time processing" (6 7) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event. "Required" (GTN 1-9), as applied to "technology" or "software", refers to only that portion of "technology" or "software" which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such "required""technology" or "software" may be shared by different goods.
12. Provide output of data. N.B.:Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections. "Digital transfer rate" (5) means the total bit rate of the information that is directly transferred on any type of medium. N.B.:See also "total digital transfer rate". "Direct-acting hydraulic pressing" (2) means a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece. "Drift rate" (gyro) (7) means the component of gyro output that is functionally independent of input rotation. It is expressed as an angular rate. (IEEE STD 528-2001). "Dynamic adaptive routing" (5) means automatic rerouting of traffic based on sensing and analysis of current actual network conditions. N.B.:This does not include cases of routing decisions taken on predefined information. "Dynamic signal analysers" (3) means "signal analysers" which use digital sampling and transformation techniques to form a Fourier spectrum display of the given waveform including amplitude and phase information. N.B.:See also "signal analysers". "Effective gramme" (0 1) of "special fissile material" means: a. For plutonium isotopes and uranium-233, the isotope weight in grammes; b. For uranium enriched 1 per cent or greater in the isotope uranium-235, the element weight in grammes multiplied by the square of its enrichment expressed as a decimal weight fraction;
13. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest "real-time bandwidth" shall be used to make the calculation. "Real time processing" (6 7) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event. "Repeatability" (7) means the closeness of agreement among repeated measurements of the same variable under the same operating conditions when changes in conditions or non-operating periods occur between measurements. (Reference: IEEE STD 528-2001 (one sigma standard deviation)) "Required" (GTN 1-9), as applied to "technology", refers to only that portion of "technology" which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such "required""technology" may be shared by different goods. "Resolution" (2) means the least increment of a measuring device; on digital instruments, the least significant bit (ref. ANSI B-89.1.12).
14. "Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Real-time bandwidth" (3) for "dynamic signal analysers" is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest "real-time bandwidth" shall be used to make the calculation. "Real time processing" (6 7) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event. "Repeatability" (7) means the closeness of agreement among repeated measurements of the same variable under the same operating conditions when changes in conditions or non-operating periods occur between measurements. (Reference: IEEE STD 528-2001 (one sigma standard deviation)) "Required" (GTN 1-9), as applied to "technology", refers to only that portion of "technology" which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such "required""technology" may be shared by different goods.
15. Provide output of data. N.B.: Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections. "Digital transfer rate" means the total bit rate of the information that is directly transferred on any type of medium. N.B.: See also "total digital transfer rate". "Direct-acting hydraulic pressing" (2) means a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece. "Drift rate" (gyro) (7) means the time rate of output deviation from the desired output. It consists of random and systematic components and is expressed as an equivalent input angular displacement per unit time with respect to inertial space. "Dynamic adaptive routing" (5) means automatic rerouting of traffic based on sensing and analysis of current actual network conditions. N.B.: This does not include cases of routing decisions taken on predefined information. "Dynamic signal analysers" (3) means "signal analysers" which use digital sampling and transformation techniques to form a Fourier spectrum display of the given waveform including amplitude and phase information. N.B.: See also "signal analysers". "Effective gramme" (0 1) of "special fissile material" means: