Betekenis van:
substructure

substructure
Zelfstandig naamwoord
  • metselwerk in de grond waarop een muur of huis gebouwd wordt
  • lowest support of a structure

Synoniemen

Hyperoniemen

Hyponiemen

substructure
Zelfstandig naamwoord
  • foundation
  • lowest support of a structure

Synoniemen

Hyperoniemen

Hyponiemen

substructure
Zelfstandig naamwoord
  • stoel
  • lowest support of a structure

Synoniemen

Hyperoniemen

Hyponiemen

substructure
Zelfstandig naamwoord
    • the basic structure or features of a system or organization

    Synoniemen

    Hyperoniemen


    Voorbeeldzinnen

    1. Method 1 — Mechanically fixed to a supporting substructure
    2. The gypsum boards, or (in the case of multi-layer systems) at least the outermost layer of boards, shall be mechanically fixed to a metal substructure (made from components detailed in EN 14195) or to a timber substructure (in accordance with EN 336 and EN 1995-1-1).
    3. The mechanical fixings shall be screws, staples or nails, which shall be fixed through the thickness of the gypsum boards into the substructure at centres not exceeding 300 mm measured along the length of each supporting member.
    4. When the substructure includes supporting members in two directions the maximum span in either direction shall not exceed a dimension equal to 100 times the thickness of the gypsum boards.
    5. When the substructure provides supporting members in one direction only, the maximum span between the supporting members shall not exceed a dimension equal to 50 times the thickness of the gypsum boards.
    6. Each joint between adjoining gypsum boards shall have a gap width ≤ 4 mm. This provision applies for any joint regardless of that the joint is or is not supported directly by a substructure supporting member and regardless of that the joint is or is not filled with a jointing material.
    7. In cases (a) and (b) each joint between adjoining gypsum boards, which is not supported directly by a substructure supporting member and which has a gap width > 1 mm, shall be fully filled with a jointing material as specified in EN 13963 (the other joints may remain unfilled).