Betekenis van:
sump

sump
Zelfstandig naamwoord
  • put voor ontlasting
  • a covered cistern; waste water and sewage flow into it

Synoniemen

Hyperoniemen

sump
Zelfstandig naamwoord
  • verzamel- of bezinkput in een riool
  • a covered cistern; waste water and sewage flow into it

Synoniemen

Hyperoniemen

sump
Zelfstandig naamwoord
    • an oil reservoir in an internal combustion engine

    Hyperoniemen

    sump
    Zelfstandig naamwoord
      • a well or other hole in which water has collected

      Hyperoniemen

      sump
      Zelfstandig naamwoord
      • beerput
      • a covered cistern; waste water and sewage flow into it

      Synoniemen

      Hyperoniemen

      sump
      Zelfstandig naamwoord
      • zinkput, zakput
      • a covered cistern; waste water and sewage flow into it

      Synoniemen

      Hyperoniemen


      Voorbeeldzinnen

      1. A representative bulk oil temperature is the temperature of the oil measured near the middle of the oil sump, not at the surface or at the bottom of the oil sump.
      2. If cooling is augmented by fans, the fans shall be placed in a vertical position so that the maximum cooling of the drive train and engine is achieved and not primarily the sump.
      3. The temperature of the lubricating oil measured in the oil sump or at the outlet from the oil cooler, if fitted, shall be maintained within the limits established by the engine manufacturer.
      4. ‘Engine crankcase’ means the spaces in or external to an engine which are connected to the oil sump by internal or external ducts through which gases and vapour can escape;
      5. The temperature of the lubricating oil measured in the oil sump or at the outlet from the oil temperature exchanger (if any) shall be maintained within the limits prescribed by the manufacturer.
      6. ‘crankcase’ means the spaces in, or external to, an engine which are connected to the oil sump by internal or external ducts through which gases and vapours can be emitted;
      7. The temperature of the lubricating oil measured in the oil pump or within the oil sump or at the outlet from the oil cooler, if fitted, shall be maintained within the limits specified in paragraphs 3.6., 3.7. and 3.8. of this Annex.