Betekenis van:
supporting structure

Voorbeeldzinnen

1. structure supporting or protecting the track
2. identifying an organisational structure supporting the enhancement of port security.
3. The supporting structure shall be of at least class A2-s1,d0.
4. Please describe the structure and dynamics of the relevant markets and provide supporting documents:
5. Single-layer roofing system comprising a single skin, non-insulated roofing on a supporting structure (continuous or discrete supporting rails) of reaction to fire classification A2-s1, d0 or better.
6. the name, contact information, role and responsibilities, organisation chart of the coordinating structure supporting the contact point of the Member State;
7. The products consist of a cloth cover that is filled with materials, and that can be placed on an existing supporting bed structure;
8. by advising on the design and implementation of an adequate organisational structure for the PNC and supporting data collection activities in order to establish a complete census of police officers,
9. Where the rear part of the protective structure roof will not sustain the full crushing force, the force shall be applied until the roof is deflected to coincide with the plane joining the upper part of the protective structure with that part of the rear of the tractor capable of supporting the tractor when overturned.
10. Where the front part of the protective structure roof will not sustain the full crushing force, the force shall be applied until the roof is deflected to coincide with the plane joining the upper part of the protective structure with that part of the front of the tractor capable of supporting the tractor when overturned.
11. The tractor shall be so placed in relation to the pendulum block that the block will strike the protective structure when the impact face of the block and the supporting chains or wire ropes are vertical unless, during deflection, the protective structure at the point of contact forms an angle of less than 20° to the vertical.
12. The roll-over protective structure is characterized by the provision of space for a clearance zone large enough to protect the driver when seated either inside the envelope of the structure or within a space bounded by a series of straight lines from the outer edges of the structure to any part of the tractor that might come into contact with flat ground and that is capable of supporting the tractor in that position if the tractor overturns.
13. The tractor shall be so placed in relation to the pendulum block that the block will strike the protective structure when the impact face of the block and the supporting chains or wire ropes are at an angle with the vertical plane A equal to M/100 with a 20° maximum, unless, during deflection, the protective structure at the point of contact forms a greater angle to the vertical.
14. In this case the impact face of the block shall be adjusted by means of an additional support so that it is parallel to the protective structure at the point of impact at the moment of maximum deflection, the supporting chains or wire ropes remaining at the angle defined above.
15. In this case the impact face of the block shall be adjusted by means of an additional support so that it is parallel to the protective structure at the point of impact at the moment of maximum deflection, the supporting chains or wire ropes remaining vertical on impact.