Betekenis van:
surface fire

surface fire
Zelfstandig naamwoord
    • a forest fire that burns only the surface litter and undergrowth

    Hyperoniemen


    Voorbeeldzinnen

    1. Maximum floor surface area per fire detector
    2. Protective clothing for fire fighting — Protective clothing with a reflective outer surface:
    3. Furniture or curtains catch fire: 50 % (0,5) (depends on surface on which candle is placed)
    4. Immediately following the ignition, the fire shall produce flame impingement on the surface of the container, along 1,65 m length of the fire source across the container;
    5. heat or fire hazard, such as a heater fan that overheats, catches fire and causes burns; thermal hazard, such as the hot outer surface of an oven that can cause a burn;
    6. A uniform fire source of 1,65 m length shall provide direct flame impingement on the container surface across its entire diameter.
    7. The watchglass is placed on a fire-resistant surface within a draught-free area that may be ventilated after each test.
    8. Low flame spread means that the surface thus described will adequately restrict the spread of flame, this being determined in accordance with the Fire Test Procedures Code.
    9. In case of unburned areas located inside the burned perimeter (unburned islands), their surface should be excluded from the estimate of the fire size
    10. .8 Low flame spread means that the surface thus described will adequately restrict the spread of flame, this being determined by a fire test according to IMO Resolution A.653 (16), for bulkhead, ceiling and deck finish materials.
    11. .8 Low flame spread means that the surface thus described will adequately restrict the spread of flame, this being determined by a fire test according to IMO Resolution A.653(16), for bulkhead, ceiling and deck finish materials.
    12. .1 protective clothing of material to protect the skin from the heat radiating from the fire and from burns and scalding by steam. The outer surface shall be water-resistant;
    13. The steel sheet surface not exposed to the fire may have an organic coating, provided that this coating has a thickness ≤ 15 μm and a PCS ≤ 0,7 MJ/m2.
    14. The steel sheet surface not exposed to the fire may have an organic coating, provided that this coating has a thickness of no more than 15 μm and a PCS of no more than 0,7 MJ/m2.
    15. Metallic coated steel sheet, profiled or flat, of nominal thickness t (mm) and coated on the surface exposed to the fire with a plastisol coating of maximum nominal thickness 200 μm and having a coating mass ≤ 300 g/m2 and a PCS ≤ 7,0 MJ/m2.