Betekenis van:
test driver

test driver
Zelfstandig naamwoord
    • a driver who drives a motor vehicle to evaluate its performance

    Hyperoniemen


    Voorbeeldzinnen

    1. He managed to pass his driving test even though he was a poor driver.
    2. The driver or applicant should also be subject to a positive practical test conducted by a competent authority.
    3. organise the test of skills and behaviour provided for in Article 7(1)(c). 2. Duration of driver training
    4. Test runs shall also validate the compatibility of the information provided to the train driver by the Track-side assembly with the physical route (e.g. speed limits, etc.).
    5. Driver having completed training or having passed a test of skills and behaviour in accordance with the provisions of Annex V.
    6. Test runs shall also validate the compatibility of the information provided to the train driver by the Track-side Assembly with the physical route (e.g. speed limits, etc.).
    7. The vehicle operator or driver must be notified in writing of the defects, the result of the test and the legal consequences.
    8. Typical position of cylindrical test rod in the opening roof and window openings Examples of symbols for driver controlled switch Figure 2 Figure 3
    9. During the test, it must be possible to travel along a straight section of the road without unusual steering correction by the driver.
    10. After any impact test prescribed in paragraphs 5.2 and 5.3 the part of the steering control surface directed towards the driver shall not present any sharp or rough edges likely to increase the danger or severity of injuries to the driver.
    11. approve and supervise the training provided for in Article 7(1)(d) or, organise the test of skills and behaviour provided for in Article 7(1)(d). 2.1. Duration of driver training at least 7 hours. 3. Content of driver training
    12. Additional methods/scales are under development in ISO TC22/SC13/WG8 for quantification of visual distraction, e.g. revision of ISO 15008, display legibility and TC22/SC13/WG8/AWI on the Lane Change Test method to measure driver distraction.
    13. When the front end of the test vehicle has reached the line AA′, the vehicle's driver must have put the gear selector on neutral position and switched off the engine.
    14. Additional Methods/Scales are under development in ISO TC22/SC13/WG8 for quantification of visual distraction; e.g. revision of ISO 15008, display legibility and TC22/SC13/WG8/AWI on the Lane Change Test, method to measure driver distraction.
    15. In relation to the maximum limits laid down in Directive 77/311/EEC for the driver-perceived noise level of wheeled agricultural or forestry tractors, the test speed established in Annexes I and II to that Directive should therefore be harmonised with the test speed required in global technical regulations or standards such as OECD Code 5 and ISO 5131:1996 [6].