Betekenis van:
time-tested

Voorbeeldzinnen

1. Therefore, at least 3 or more dilutions at one time are recommended to be tested.
2. Therefore, at least 3 or more dilutions at one time shall be tested.
3. Samples above the linear portion of the response curve must be diluted and re-tested. Therefore, at least 3 or more dilutions at one time are recommended to be tested.
4. A blank and a reference sample(s) have to be included in each test series, which is extracted and tested at the same time under identical conditions.
5. CBT requires a long development time as the story board must be developed, reviewed, tested and revised many times before the first release to students.
6. In particular for quantitative calculations, the induction of the sample dilution used must be within the linear portion of the response curve. Samples above the linear portion of the response curve must be diluted and re-tested. Therefore, at least 3 or more dilutions at one time are recommended to be tested.
7. Time synchronisation tests: the ability of the registry to establish its system time and to change its system time in order to be consistent with the system time of the Community independent transaction log and UNFCCC independent transaction log shall be tested.
8. Following the immersion, the pressure relief device shall be leak tested by applying an aerostatic pressure of 3000 kPa for one minute during which time the component shall be checked for external leakage.
9. Apart from this, it was inappropriate for the BdB to speak of the method used in WestLB as tried and tested in view of the (at the time) pending court proceedings in that case.
10. Lowest Observed Effect Concentration (LOEC): is the lowest tested concentration at which the substance is observed to have a statistically significant reducing effect on growth (at p < 0,05) when compared with the control, within a given exposure time.
11. The formulation defined during the research work is tested on samples of the order of a kilogram, the change of scale generating most of the time differences in structure and properties.
12. Note: Before using this method for the first time, perform preliminary tests to ensure reproducible detection of 103 to 104 colony-forming units of R. solanacearum per ml added to extracts from samples which previously tested negative.
13. lit at a time, the test shall be carried out in accordance with this condition, activating [2] When the tested headlamp includes signalling lamps, the latter shall be lit for the duration of the test.
14. Quality control (QC) charts for each type of reference material shall be recorded and checked to make sure the outcome is in accordance with the stated guidelines. In particular for quantitative calculations, the induction of the sample dilution used must be within the linear portion of the response curve. Samples above the linear portion of the response curve must be diluted and re-tested. Therefore, at least 3 or more dilutions at one time are recommended to be tested.
15. Any substance or mixture which, in the 1:1 mixture, by mass, of substance (or mixture) and cellulose tested, exhibits a mean pressure rise time less than or equal to the mean pressure rise time of a 1:1 mixture, by mass, of 65 % aqueous nitric acid and cellulose; and the criteria for Category 1 and 2 are not met.