Betekenis van:
top of the line

Werkwoord

Voorbeeldzinnen

1. Deal in top of the line of goods.
2. Overseas subsidiaries are putting out top-of the-line products.
3. That store sells top of the line purses but everyone knows they're really just cheap knock-offs made in China.
4. The tangent S to the top of the head restraint shall be drawn perpendicular to the reference line.
5. The tangent S to the top of the head restraint is drawn perpendicular to the reference line.
6. The dimension of the crankshaft centre-line to the top plane of the valve cover (or cylinder head) plus twice the stroke; or
7. In the case of separate front seats, the rear passengers’ head-impact zone shall extend for 10 cm on either side of the seat centre-line, in the top part of the rear of the seat-back.
8. To provide for the use of steering wedges, measure the reference dimension k = 137 ±3 mm at 32 mm below the top surface and at a distance of 200 mm from the transverse centre line of the coupling. ( 2)
9. To provide for the use of steering wedges, measure the reference dimension k = 137 ±3 mm at 32 mm below the top surface and at a distance of 200 mm from the transverse centre line of the coupling.
10. The point of impact is defined by the plane tangent to the protective structure passing through the line made by the top outer points of the front and rear tyres (Figure 6.7).
11. In the case of separate seats without head restraints, this area shall include the rear part of the seat-back between the longitudinal vertical planes situated at 100 mm on either side of the longitudinal median plane of the seat centre line, and above a plane perpendicular to the reference line 100 mm below the top of the seat-back.
12. By means of a spherical headform 165 mm in diameter an initial force producing a moment of 37,3 daNm about the R point is applied at right angles to the displaced reference line at a distance of 65 mm below the top of the head restraint, the reference line being kept in its displaced position in accordance with paragraph 6.4.3.2.
13. .5 Tanks which are intended to hold liquids, and which form part of the subdivision of the ship, shall be tested for tightness with water to a head up to the deepest subdivision load line or to a head corresponding to two thirds of the depth from the top of keel to the margin line in way of the tanks, whichever is the greater, provided that in no case shall the test head be less than 0,9 metres above the top of the tank; if testing by water is impracticable, air leak testing while the tanks are subjected to an air pressure of not more than 0,14 bar may be accepted.
14. If the presence of gaps prevents the application of the force prescribed above at 65 mm from the top of the head restraint, the distance may be reduced so that the axis of the force passes through the centre line of the frame element nearest to the gap.
15. If the presence of gaps prevents the application of the force prescribed in paragraph 6.4.3.3. at 65 mm from the top of the head restraint, the distance may be reduced so that the axis of the force passes through the centre line of the frame element nearest to the gap.