Betekenis van:
towing line

Voorbeeldzinnen

1. All relative positions of the anchorage points with respect to the reference line, for which the towing vehicle manufacturer shall provide all the necessary information to the towing device manufacturer, shall be repeated on the test bed.
2. Note: The line parallel to the reference line passes through the centre of the highest and nearest point for mounting the towing bracket to the vehicle — see Annex 6, paragraph 3.1.5.
3. Coupling and uncoupling, or uncoupling and re-coupling a trailer from its motor vehicle; the manoeuvre must involve the towing vehicle being parked alongside the trailer (i.e. not in one line);
4. Coupling and uncoupling, or uncoupling and re-coupling a trailer from its motor vehicle; the manoeuvre must involve the towing vehicle being parked alongside the trailer (i.e. not in one line) (categories CE, C1E, DE, D1E only);
5. The horizontal line of action shall be equivalent to being parallel to the ground and along the longitudinal median plane of the towing vehicle and pass through the centre of the coupling pin.
6. The dynamic test shall be performed with a horizontal alternating force of Fhw= ±0,6 D acting in a line parallel to the ground and in the longitudinal median plane of the towing vehicle passing through the centre of the coupling pin.
7. The trailer must travel without excessive deviation or unusual vibration in its steering equipment when the towing vehicle is travelling in a straight line on a flat and horizontal road at a speed of 80 km/h or the technically permissible maximum speed indicated by the trailer manufacturer if this is less than 80 km/h.