Betekenis van:
trailing edge

Voorbeeldzinnen

1. TRAILING EDGE FLAP OR COCKPIT CONTROL SELECTION
2. Trailing edge flap or cockpit control selection
3. For the purposes of 3A002.d.1., "pulse duration" is defined as the time interval between the leading edge of the pulse achieving 90 % of the peak and the trailing edge of the pulse achieving 10 % of the peak.
4. "Variable geometry airfoils" (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight. "Yarn" (1) is a bundle of twisted "strands".
5. "Variable geometry airfoils" (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight. "Yarn" (1) is a bundle of twisted ’strands’.
6. For the purposes of 3A002.d.1., ’pulse duration’ is defined as the time interval between the leading edge of the pulse achieving 90 % of the peak and the trailing edge of the pulse achieving 10 % of the peak.
7. "Variable geometry airfoils" (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight.
8. This device shall reverse the window/roof panel/partition before it exerts a pinch force of more than 100 N within the opening of 200 mm to 4 mm above the top edge of a power-operated window/partition or in front of the leading edge of a sliding roof panel and at the trailing edge of a tilting roof panel.
9. "Variable geometry airfoils" (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight. "Yarn" (1) is a bundle of twisted 'strands'. N.B.:'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel.
10. "Vacuum Atomisation" (1) means a process to reduce a molten stream of metal to droplets of a diameter of 500 micrometre or less by the rapid evolution of a dissolved gas upon exposure to a vacuum. "Variable geometry airfoils" (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight.
11. "Vacuum Atomisation" (1) means a process to reduce a molten stream of metal to droplets of a diameter of 500 micrometre or less by the rapid evolution of a dissolved gas upon exposure to a vacuum. "Variable geometry airfoils" (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight.