Betekenis van:
water tank

Voorbeeldzinnen

1. Measure the quantity of water left in the pulveriser tank.
2. Where necessary, supplementary aeration of tank water shall be provided.
3. The tank must be completely filled with a non-flammable liquid (water, for example).
4. Fill the pulveriser tank with 1 ± 0,005 litres of water and place this as described in the diagram.
5. Any water subsequently added to the tank may be discharged into the sea when all the following conditions are satisfied:
6. The pump shall be brought into action automatically by the pressure drop in the system before the standing fresh water charge in the pressure tank is completely exhausted.
7. Appropriate display instruments and test systems (e.g. pressure gauges, pressure-tank water level indicators, pump test piping) shall be installed for monitoring and checking the system.
8. In larger enclosures, a water tank (which is easily emptied) is particularly valuable for M. fascicularis but M. mulatta will also use it.
9. Content of the national legislation: By derogation from the table in chapter 3.2. it is permitted to use a tank-container with tank-code L4BH instead of tank-code L4DH for the carriage of UN 3130, water reactive liquid, toxic, III, n.o.s. under certain conditions.
10. Content of the national legislation: By derogation from the table in 3.2 it is permitted to use a tank container with tank code L4BH instead of tank code L4DH for the carriage of water reactive liquid, toxic, III, n.o.s. under certain conditions.
11. Reference to Annex I, Section I.1, to this Directive: 3.2. Content of the national legislation: By derogation from the table in 3.2 it is permitted to use a tank-container with tank-code L4BH instead of tank-code L4DH for the carriage of water reactive liquid, toxic, III, n.o.s. under certain conditions.
12. The tank must be filled to its capacity with a water-glycol mixture or with another liquid having a low freezing point, which does not change the properties of the tank material, and must then be subjected to a perforation test.
13. Provision shall be made to prevent any deep tank having bilge and ballast connections being inadvertently flooded from the sea when containing cargo, or being discharged through a bilge pump when containing water ballast.
14. In view of the serious loss of stability which could arise due to large quantities of water accumulating on the deck or tank top consequent on the operation of the fixed pressure water-spraying system, the Administration of the flag State may require pumping and drainage facilities to be provided additional to the requirements of Regulation II-1/C/3.
15. The implementation of one energy efficiency improvement measure, e.g. hot water tank and pipe insulation in a building, or another measure with equivalent effect, may have future multiplier effects in the market, meaning that the market will implement a measure automatically without any further involvement from the authorities or agencies referred to in Article 4(4) or any private-sector energy services provider.