Betekenis van:
workpiece

Voorbeeldzinnen

1. A maximum workpiece outside diameter or length of 150 mm;
2. limited to a maximum workpiece capacity of 150 mm outside diameter or length; and
3. Limited to a maximum workpiece capacity of 150 mm outside diameter or length; and
4. by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines).
5. N.B.:'Active tooling unit' means a device for applying motive power, process energy or sensing to the workpiece.
6. sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece;
7. by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station); or
8. Multi-purpose machines where the workpiece is manually transferred between operations, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
9. "Inflatable membrane tool finishing" is a process that uses a pressurized membrane that deforms to contact the workpiece over a small area.
10. sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed;
11. "Compound rotary table" (2) means a table allowing the workpiece to rotate and tilt about two non-parallel axes, which can be coordinated simultaneously for "contouring control".
12. For the purposes of 2B, the number of axes which can be co-ordinated simultaneosly for "contouring control" is the number of axes which affect relative movement between any one workpiece and a tool, cutting head or grinding wheel which is cutting or removing material from the workpiece.
13. For the purposes of 2B, the number of axes which can be co-ordinated simultaneously for "contouring control" is the number of axes along or around which, during processing of the workpiece, simultaneous and interrelated motions are performed between the workpiece and a tool.
14. "Direct-acting hydraulic pressing" (2) means a deformation process which uses a fluid-filled flexible bladder in direct contact with the workpiece. "Drift rate" (gyro) (7) means the component of gyro output that is functionally independent of input rotation.
15. Multi-purpose machines where the workpiece is manually transferred between operations, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials 8465 10 10 p/st S